DUMBORC 2 Pcs X6FG(Built in Gyro) 6 Channels 2.4GHz RC Receiver for DUMBORC X6/X4/X5 Transmitter RC Car Boat Tank Drifting Car

Description

Original Replacement Dumborc X6FG Receiver(With Gyro) Binding Method: 1.The distance between the transmitter and receiver is about 30-50 cm. 2.Turn on the transmitter, then power on the X6FG. 3.Press the black binding button of the receiver in one second until the receiver light starts blinking and release, the binding will be successful when the LED always on. Notes for gyroscope mode: 1.Working Mode switching method: X6FG receiver defaults normal mode(Green Light),quick press the binding botton 3 times within 1 second to switch to gyro mode(Yellow Light). 2.Check Servo Direction： When using gyro mode,make sure your servo direction is correct. Normally, the wheels should turn right to correct when the car is turned left, while the wheels should turn left to correct when the car is turned right. If the servo direction is reversed, short press binding button twice within 1s. The Red indicator flashes twice means correction completed. 3.Gyro Sensitivity adjustment: Adjust by channel 6, especially suitable for racing or drifting cars. Compatible with controller: X6(Normal/Gyro Mode)/ X4(Normal Mode)/ X5(Normal Mode) **NOTE：The gyro function is controlled by channel 6, but the X4/X5 series transmitters do not have channel 6, so X6FG receiver can only be compatible with X4/X5 series transmitters in normal working mode, but not the gyro working mode.** X6FG Receiver Specifications: Channel: 6 Model:Cars/boats/Tanks/trucks/Crawlers/Buggies/Racing car and so on Control Distance: more than 400m Spread Spectrum: FHSS Antenna Length: 200mm Work Current: 30mA Power Supply: 4.8~10.0V DC RF Power: <10dbm Channel Resolution: 4096 Size: 1.37*0.79*0.51in(35*20*13mm), fits most model size Weight: 6gPackage included: 2*X6FG Receivers