TSQQST Case for Lenovo Tab M8 3rd Gen 2021 TB-8506F TB-8506X for Kids w/Sand | Heavy Duty Rugged Case for Lenovo Tab M8 HD Tablet 2nd Gen 2019 TB-8505F TB-8505X/ Smart Tab M8 TB-8505FS w/Strap-Black

I'm not a fan of the ultra-thin profiles of most tablets. Understandably if its a smart phone you want it to slip into a pocket easily but with a tablet for home use there isn't much occasion where it needs to be ultra-slim and consequently unwieldy and as secure as a wet bar of soap. That being said, I know these are meant to be travel friendly and as such I'm glad that they are small and sleek and, in the case of the Lenovo M8 HD, power misers as well. I'm okay with this because I occasionally travel with my tablet and because the remedy for the non-tactile properties of the ultra-sleek tablet is a silicone case like this one. They're not expensive, they do a darned good job of protecting the tablet, and they make the tablet much easier to handle in and around the house.Normally I don't look for a feature rich version of the silicone case. It's usually going to be just a simple stretch into place "skin" of sorts where corners are protected and screen is recessed to where it is protected from drops and such. Those usually hover around the $10 mark or so. What intrigued me about this case was the rotating stand and the handstrap feature. I use the tablet in bed often as it sits on my nightstand. I also occasionally use it in the kitchen or bathroom too. So those features would undoubtedly come in handy. My first thought was that paying double the cost was a little out of form but that was followed by, "what's another $10?"The case installs in parts that are intuitive and easy to fit. Some stretching is required and some massaging of corners to get everything to fit. But once in place everything fits perfectly. Buttons work great and have good feel, the power jack is covered by a silicone flap which is easy to access as needed. Cameras front and back show fine and the speaker is exposed. The case itself is nice and hefty, easy to carry, non-slip in enough areas, and dare I say "bouncy" in all the right places.I removed the shoulder strap retainers that came pre-installed as I don't see myself carrying the case that way. I put those away with the shoulder strap as a just-in-case item for later. The handstrap adjusted with velcro easily and the stand works great. The fact that the stand/strap mount rotates 360 degrees is awesome as it adapts to whatever angle your hand is at whatever orientation that you're standing the tablet on any flat surface. This was of instant benefit as I slipped my hand in and it felt both comfortable and secure.The one feature I do wish it had was covers for the cameras. I ended up 3D printing some covers for it. I also feel like there is little to no bezel clearance for a tempered glass screen protector although the case itself has enough flex to accommodate it anyway so I'll be adding one in the near future. That being said the case provides a substantial amount of protection for the screen as long as it gets dropped on a flat surface. Conclusion: Well worth the money as it is grippy, wieldy, standy, grabby, and functionally perfect.

This case is amazing!! Runs circles around the previous case (different brand) I purchased, hands down. Very nice design. The hard and soft case were super easy to assemble and fit perfectly on my device. I have already dropped my device a couple of times and the durability and sturdiness of the case protected it from any damage. I would definitely buy this case again!!

This was very easy to install. It looks stealthy, feels durable & not at all flimsy. Fit perfect on my sons tablet. The added holder to slide your hand in is excellent too. It has yet to break off or detach itself from the case. We have had it for a month now and it’s definitely a product worth buying (Hands Down). So far an excellent and must buy if you have a tablet.

This item fits perfectly and sturdy

Very nice! Sleek as much as it can be for this type of case. Only issue is the instructions and image for putting the straps on were extremely tiny - they aren't readable. Figured it out, but it was a bit of a challenge. Here's how:- Separate one of the straps from its clip;- Use the tool to thread/insert the small side of the strap through the very corner slot by putting it into the middle of the loop and pressing it through.- Next, take the tab from the same small strap and insert it through the small loop that you just put through, which 'ties' it off.- Then, clip attach it back to the long part of the strap and one side is done.- Repeat on another corner - whichever one you prefer. Recommend using the same side, not a diagonal corner.Hope this helps!

I love this case! My little brother likes to throw his tablet on the bed or jump around while watching videos. It has dropped a good amount of times and the case has protected the actually tablet. He also liked the strap it came with so he could carry it around with ease. It was also easy to put on! Highly recommend

I love how rugged my tablet has become with this new case. The case is super convenient because it has a kickstand that rotates to view the tablet vertically or horizontally. It also has a palm strap or neck strap to hang on to it. I also like the rubber piece that covers the charging port to keep water out.

I got this for my grandson’s tablet he’s 8. He’s dropped it, knocked it off the table, chair, counter, you name it lol. And it’s definitely done it’s job. I’m so impressed with the sturdiness. It’s a must have for protection if you want to keep your tablet long.