MAXGTRS 881 LED Fog Bulb CREE Chip with Condenser Lens LED Fog Light - 4300k Warm White LED Fog Lamp

These may be bright but I dont know. To big to fit through the factory hole the lamp lives in. Noticed one was falling apart... inside the package. That does not speek well for product quality. I would NOT recomend these lamps. REVIEW UPDATE: I have given them three stars as an upgrade from one star. While my product arrived damaged and did not fit my application I feel I MUST give them some credit for trying to make this right! They have reached out to me with multiple emails trying to fix this problem and send me a replacement lamp set that will work. My busy schedule has not allowed me to send them the photos and other information they have requested as of this time. GOOD JOB with the follow up and trying to make this right! I dont often see this type of ACTIVE participation to find and fix my problem. I will get back to this and hope to write another follow up review with my results.

my 2013 ezgo Express L6 had halogen bulbs (# 862) - these were direct replacements and took about 1 minute to change each bulb. The bulb fit right in and is snug. The connector went on easy and the clip locked perfectly. Very white light compared to the stock "Yellow" halogen bulbs".I just put them on today, so if there is anything negative at all about these bulb as they get some hours on them I will update my review. But as of right now I would buy them again.NOTE: in the picture the bulb on the Left is the old Halogen bulb, the one on the Right is the new LED Bulb. This picture was taken during the afternoon and you can easily see the difference.

First time trying this brand. Have used BEAMTECH LED in the past with great success, but this vehicle didn't have the space for the large cooling fin sections. These do not have that cooling fin section, so take a lot less space. The 1st bulb installed, very simply, and came right on. Plenty bright. Plenty happy....for a minute. Then, before I could even re-install the lamp assembly, only about half of the LED Chips remained on. Never touched the bulbs, never bumped anything. Never dropped anything. Tried, removing and re-installing the bulb, tried wiggling the plug on lamp's harness. Tried turning off and back on...Half dead and 100% Worthless to me, and my headlamps. Just glad they were returnable. ZERO issues with the vehicle with factory bulbs re-installed, so can't blame the vehicle for this one.

Your browser does not support HTML5 video.  These lights are easy to place, just plug and play installation in the light sockets, they provide a 360 full angle light spread, these are very reliable lights , they have high refractive concentration they also do not heat up and the high power they have really brings extra safety to the road!

One bulb was defective as seen in photo. Glass seems to be ok so I glued it back in. The bulb lights up, but for how long I don't know.I installed and the amount of light is extremely low. It's not dark enough yet but looks like another waste of time and money.It's now a few hours later and dark. I went for a test, and what a joke. These things a simply awful. The only thing they're good for is possibly daytime running lights. There is virtually no difference when I add this light over the regular headlights. When I test and have only these light on, (headlight off) there is no usefull light at all.I might upload a photo, but for now I've wasted enough time.I wonder if the seller or Amazon care about this?

I installed the MAXGTRS 50W H3 CREE Chip LED Fog Light Bulb in my factory integrated fog lamp spot. This was an unused fixture in my 2004 Mazda 6s wagon as the vehicle came equipped with the OEM option lower fog lamps.I removed the lamp cutoff to increase the projection pattern for effective daytime use.The LED lights are not as bright as the 55w halogen bulbs they replace but the color temp and modification make it perfect for a DRL.The lamp is a different length than a standard H3 and projects a different light pattern.

Okay so I get this bulb in the mail from Amazon I install it in the bike and the one bulb only last a few hours and then it burns out. Amazon kindly replaces it I get the delivery within a few days and I get the balls I take the whole motorcycle fog light apart again put the new bulb in tested that it comes on and goes off correctly. I put it back in and it's yellow light versus the bright 6000k lights that I originally had ordered. Seriously of taking this thing apart 5 times now because of these lights. I'm going to have to not recommend this product.

Bought these as an upgrade to my Honda pioneer 700. They are good for the money and they do not get hot in the housing. However, people looking at them say they are bright but I really don't see much difference between these and regular halogen bulbs. I know its because of the reflective housing, but still. I will keep them in because people do see me much better.