Power Perfect Box - Whole Home Dirty Electricity Filter, Surge Protector and Cost Saver!

I paid an electrician $185 to install this only to find out that it doesn't work. I checked every outlet in my house with a Stetzerizer meter. They all register between 800 and 1800. The safe zone is 20 or less.Not only that, but this is supposed to be good for a 3,000 square foot house. I have two fuse boxes and it can only be used on one. So it's not the whole house unless your house has only one fuse box.I contacted the manufacturer. They sent me literature that didn't address the problem and have not been in touch since. Not sure how I am going to get this thing off to return it. I don't want to spend another $185 for the electrician. (sigh)Update: I called the electrician to find out where the blue light is that is supposed to tell me if it's working. That cost me another $85. The ilght is inside behind the cover that the instructions tell you not to remove it. So, unless you drill a hole in it, you can't see the light. The light was illuminated, but the dirty electricity meter shows no reduction whatsoever. So that was a waste of $1200.

After Installed, I used a Green Wave Broadband EMI meter to test the AC wall outlets. It reduces the line noise by 25% when Satic Power Perfect Box is turned ON vs turned off. Therefore, this device will increase the power efficiency level, not only reduce the harmful EMI but also reduce the appliances power consumptions. The specification status it also has the built-in power surge protection so that eliminate the use of surge protection strips. My main panel is full so have to add a subpanel to handle this device with a 30A breaker.

I contacted Satic after my units were installed to request 3 party testing and proof. There is no warranty with this product and no proof that it works. They are also not surge protectors. I have 3 boxes on my house. EEleos did a good job of selling me and I have no verification.

First off, if you have dirty electricity sources in your house (computer, TV, cellphone charger, mini-split, anything digital, CFL or most LED bulbs) blocking it at the service entrance is no help. If you can find suitable linear power supplies for your electronics, that's a win (though don't have it real close to you due to the magnetic field, unless it's toroidal). If you have cleaned up the power on the inside, then yes clean up the incoming power, but this Satic product is not a good value. Have an electrician put outlets on each phase near the panel, and plug in 2 Stetzer or Greenwave filters. But you also need to address common mode noise (which doesn't show on a Stetzer meter, nor is it reduced by the Satic box). For that you need a 3-phase choke. CoilWS sells one that can handle 100 amps. You can have an electrician put that in, and downgrade your main breaker to 100 amps. Or if you have money get a real 3 phase multi-stage filter, from say Corcom or better yet the military grade ones from Filtron or Genesco. These all need to be RF grounded and must be located far from the house (with the electric meter also moved so the filter is between the electric meter and the house.

I was experiencing chronic fatigue from working from home. I did some research and found out that houses with solar panels have very high levels of dirty electricity. I thought I was sleeping well before but after having this installed my sleep is much deeper. I don't feel the EMF fatigue in my head anymore and I feel better.

loving the full house ability and can't wait to see how much it saves us. the plug in helped reduce cost by 25% but it worked so well to reduce surges and drains through the house