TANGDIAABBCC Aeiniwer Yifantacy Allmost Compatible with 2005-2011 Hummer H3 Automatic Leather Shifter Boot Shift Cover Black

Like others on here, I found this to be serviceable and actually looks quite nice once you have it in place. That being said, it took me about 60 minutes to get it there. This should not be undertaken by anyone faint of heart or not up for a bit of a challenge. As others have noted, there are no instructions and the shifter glove is a tight fit.There are several YouTube videos on how to remove your current shifter/boot assembly so no issues there - that's the easy part. Not sure if there are any videos that describe how to put a new boot glove on as I could not find any.If you look at the glove, there are three seem lines in a vague triangle shape (if you think of the top of the glove as the top of a pyramid and the bottom of the glove as the base). As best as I can tell, the two seems that are closer together go on the right side of the shifter and the one far seem by itself goes on the left. There's a plastic insert that fits up by the knob that you have to line with the top of the boot glove and a larger plastic frame insert at the base that you have to line with the bottom of the boot.This is not a simple task but as with most things, persistence pays off, and ultimately I have a brand new looking shift boot. All for $20 and about an hour of my life.

Vinyl material was a bit hard to maneuver into retaining plastic piece and keeps popping out of place. The vinyl is thicker than the OEM material and doesn’t fold well when changing shapes from “park, to reverse to drive”. Not doo ok but it will soften up over time. On a plus note, it does look 100 times better than the cracked OEM part

I had to watch a YouTube to help me install it. The leather is thick and seems durable, but not pliable, which made it hard to install. Definitely worth the money as the dealer wanted to charge $100.

It re-new the look of your entire console area!Just keep in mind that the thickness of the leather on the lower part of the frame will prevent you from shifting the lowest gear!

Great replacement for my Hummer H3 shift boot!! It was a little difficult to install, although not as hard as I expected. Some of the reviews made it sound bad—probably took me 45 minutes altogether. As stated, do not cut the leather in any way, you’ll need every inch of material to make it fit!! It’s very nice, looks and feels good!!

Great quality, looks great installed.. not quite big enough. product needs to be just 1/2 in longer. it would have been 100% easier to install

Nice product a pain in the a$$ to replace though... Mainly because the leather is so thick and stiff. I ended up not using the retainer clip that comes factory and instead opted to use a ziptie

This was a lot easier than I expected. Quality product. Just watch how the seams line up with the seams on the shifter. YouTube a 7 minute video that shows you how to do it. It takes about 30 minutes to do.