2.4G Electric Receiver Board Spare Part for WLTOYS V911 4CH 2.4GHz RC Helicopter

I use these boards to make tiny wings to fly in the gym during the winter. Use the delta mixing in a hobby grade flysky std. capable radio to achieve elevon mixing. They use the flysky protocol and the terminals to use for the main motor are M2+ and M2-. The battery lead should be at the front of the board next to the micro servos. They are also pretty fun at the field with a bunch of them in the air at once. 3d printed motor mount from thingiverse for 8.5mm brushed motor use paper clips for the control rods and use 300mah 1s battery strapped to the underside. Ive been getting about 3.5 minutes of flight time with a husban quad prop. Feel free to copy my pattern if you like just blow these images up on screen and trace them out on a 48cm chuck glider wing and tail surface for the vertical stabilizers. The two tiny bits get glued to the bottom of the wing just on the other side of the top vertical wing surfaces. Ill also try to answer questions if im able to.

Works fine, check antennae tho, range checks a long ways with io6 flysky transmitter for such a small brick. Ive flown this outdoors on a dlg 19".

After going through the effort to swap in this circuit board, it did not work. No LED, no funtion.

If you have the ability to hook it up without braking thetiny wires it function's very well .It does what it is meant to do

beware on the V911 WL toys helcicopter DOES NOT have an overload so when you crash, lock up the rotor with the throttle on you will smoke this board and maybe a battery!Good part, it fits and nice to be able to have repair parts available to repair such a small R/C toy. V 911 is a good value

Excellent replacement receiver for my Hero H911 War Bird it came via us postal in four days, It also came with the antenna and the battery connection in place, it made for quick and easy install, I couldn't get it bind at first and thought I had gotten a bad receiver, so I sent Red Rock USA a message about 10:00pm. and I was amazed at how fast they responded that same night, I asked a few questions like will the WL toys V911 receiver bind with my Hero H911 controller, they said they'd didn't know but they would except it if I wanted to return it, the Xheli web site showed a V911-16 as a Hero H911 replacement part, so I went onto YouTube and looked at how to bind a V911 since I had purchased a V911 receiver and it worked on the very first try, I did a few adjustments and it flys like new, thanks Red Rock USA you Rock! I will be buying more Heli parts from Red Rock in the future just for the customer service here in the USA, fly high and party on...

I've crashed my v911 hard, many times, finally into a solid tree. The servos then seemed to stop responding about 50% of the time. I replaced the broken v9 board with this v12 board and now it flies even better. I do wish it came with instructions on where to solder the wires, as I did not find anything on YouTube as somebody else had mentioned. I took photos of where the wires were on my old board, and soldered my wires into the same places, even though the layout of the new board is laid out and labeled slightly differently. It worked! Also it shipped via China Post and got here within 1 week; impressive!

Much cheaper than other Micro 2.4ghz boards, read the RcGroups forum thread about these boards for the best info. Binds easily on the FlySky protocol radios (not 2A but the previous one)