OTUAYAUTO Front Windshield Washer Nozzles Replacement for 2005-2010 Toyota Sienna, 2005-2012 Corolla, 2004-2008 Solara, 2000-2005 Tundra Spray Jet Kit, Replaces OEM 85381-AE020 (pack of 2)

Windshield washer nozzles are the most extreme example I've found of auto manufacturer markup of parts! New, original equip manufacturer (Mopar), wiper nozzles for a 2016 Chrysler Town & Country are currently about $60 each. I don't know how such a simple plastic part (it does have a spring inside) can be this expensive from the dealer. I bought these OTUAYAUTO Front Windshield Washer Nozzles for my father-in-law's van. Comparing to the original Mopar nozzles I was replacing because one had broken: The spray pattern is just as good as the Mopar nozzles. They are very quick to install - they take about three to five minutes each. The Mopar nozzles are not adjustable and neither are these, so nothing lost there. These fit perfectly and stay put because they snap in place with tabs. The spray appears to come out at the same speed and coverage, and without leaking. Buying these is a no-brainer at the price point and considering the ease of installation/removal, should they fail.

My husband accidentally broke off my old nozzles. These were really easy to install and work perfectly. I drive a 2014 jeep patriot sport.

I was a little bit hesitant because of the mixed reviews. I went through and read the reviews that were related to my particular make and model and they were mixed as well. Purchasers either loved them or hated them. I think the issue is quality control. Of the two in the pack once installed, one worked beautifully and sprayed a nice fan in the middle of the windshield on the driver's side however, the one I installed on the passenger side seemed far less powerful and hit much lower. I ran a straight needle into the passenger side sprayer a few times and it seems to work better, not as good as the driver's side but, at least now it hits a little higher onto the windshield. It still does not have as much of a fan spray as the driver's side but I can live with it. I predict if I were to buy another set or two I would get at least one more good sprayer. For 20% of the cost from the dealer replacements or a third of the cost from an auto parts store they work well. You're getting a fan spray as opposed to two straight streams that most of the replacement nozzles offer. I might buy a second set just to try out my theory.

⭐⭐⭐⭐⭐ I couldn't be happier with the Front Windshield Washer Nozzles! They're a perfect replacement for my Chrysler vehicle, fitting seamlessly and functioning flawlessly. The premium spray jet kit ensures a strong and consistent spray, effectively clearing my windshield for optimal visibility in all conditions. Plus, with a pack of two included, I have a spare on hand for future use. The fact that they replace multiple OEM part numbers adds to their versatility and value. Installation was a breeze, and I'm impressed with the quality and durability of these nozzles. Overall, a fantastic product that I highly recommend to any Chrysler, Dodge, Jeep, or Ram owner in need of reliable windshield washer nozzles.

Ordered these because the OEM ones broke apart due to being sun baked for many years, and would no longer spray due to the water inlet snapping off. Installed these and tested them out, they both sprayed fine, but only about halfway up the windshield, no where near as good as the OEM, but they worked and that’s all I needed. 5 months later, the nozzle actually popped out of one of them and when you went to use it, it would just dribble out on the hood, not hitting the windshield at all. Luckily was able to push it back in good enough for it to hold for now, while I order OEM ones. These are good to get you by, but I would definitely recommend spending the extra dollars to get OEM ones if you want them to actually spray and cover the windshield. UPDATE about 4 weeks later the nozzle flew out again when I went to use it and is gone for good. now it just dribbles out on to the hood. Don't recommend this product at all

The nozzles are the same style, design, and fit as my factory Dodge (2013 Journey). They are extremely easy to put in, literally just snap into the holes and then you reconnect the water line tubing. If you are even slightly auto tech savvy these are a no brainer and a simple repair/replacement. If not it will take a little thought and work to remove and or re-install tubing especially if replacement tubing is needed but entirely doable without the need to take your car to a shop and pay (usually $50 or more) to have them installed. Unfortunately in my case the water spray from the nozzles are not lined up correctly for my car and windshield. They work, however the water spray is not fanned (1), not even (2), and it doesn't reach the center (or even low center) of my windshield (3) as stock (OEM) nozzles do. (1) Water spray is not fanned means the spray of water is not in a fan shape or spread across the "stream" of water. I'm staying away from the word stream because it is Not a stream of water Nor are windshield spray nozzles supposed to be a stream. They are supposed to be a fan of evenly distributed water across that fan shape so as to cover a wider/larger area of the windshield. Some car's windshield nozzles may spray more of a stream but will still be in a fan shape to help cover and wet down a larger area of the windshield. In any case not being fanned and the spray leaning more towards a stream of water is not necessarily a bad thing as it still provides the same volume of water and the saturation amount may be equally as important as coverage of area (fanning). (2) The water spray not being even refers to the fact that on each nozzle the water spray is not evenly spread across its spray of water. From a nozzle more water comes from different areas of its spray/"stream". As in, one side of the water spray has a larger amount of water coming out than the other portion of that same water spray. (3) The water spray barely gets to the bottom of my windshield and most just squirts my hood or under the windshield wipers. This may be due to the fact that these nozzles cover a very wide range of car makes and models and will fit since the holes they fit in are all the same. However, some makes and models of cars may have their wiper nozzles further or closer to the windshield, than others, meaning the distance from where the nozzles sit to where the hood ends, and windshield begins, may be different. Angle of hood & the angle of the windshield will play a factor but for most, if not all, the vehicles listed that it will fit will all have extremely close/similar specifications. I even tried to move or adjust the nozzles to see if I could manipulate the water spray or move it to hit higher on my windshield but to no avail. The distance from the nozzle to the edge of my hood is 5" (pictured). The distance from the nozzles to the middle of my windshield where the OEM nozzles sprayed, and optimal location, is 24" (pictured). The spray from these nozzles only get to almots16" (pictured) which is too low to get full/best coverage. They are a good value for their money if you are willing to risk a potential less than optimal spray location (maybe yours will work better than mine did). They Do work and they Do spray the windshield but may not do so, well enough, to help properly clean the windshield, as in my case. Only recommendation I could give is that if you have a distance from the nozzle to your hood edge and/or distance from the nozzle to the middle of your windshield similar to mine then you may have the same performance and may want to look at other companies instead, or just eat the cost of an OEM pair from an auto parts store or your car's manufacturer dealership.

Que son funcionales como los originales

Not recommended

Fáciles de instalar.

Misma calidad que el original ....muy bueno

This item was so easy to install by myself and was a huge savings compared to what the mechanic wanted to charge.