TIVIT Ironing Board Cover 22 x 58, Made in Italy. Pro Grip Pad Covers w/3 Fastener Straps & Pull Bungee Cord - Durable Scorch & Stain Resistant Padded Layers, Heat Reflective AlumiTek PRO Top Coat

I'm giving this 5 stars as I doubt there is a cover available that is better. In spite of that, I think there are a couple of minor tweaks that would make it perfect. Before mentioning them, I'll say that this cover is thick, well padded, seems durable, feels great, fits well and looks good. I was fantasizing that I could find a cover this good and it meets my expectations. All the covers I've seen locally are flimsy, baggy, with little or no padding and many are butt-ugly, looking like the bizarrest curtains ever from the 1960's. This is just plain, which is NICE. It it very solidly made and the padding is sumptuous -- better than any other cover I've ever seen. (I have carefully added much more padding -- old towels, tablecloths, fabric project leftover scraps ... about 7 layers. I did this because when I originally bought this ancient wood ironing board, that's the way it came. Previous owners had put on all kinds of fabrics and then new covers over the old without ever removing any of them. I wanted a fresh start so peeled off all the old layers to discover that there were 7. Now it's the same but new and was a great opportunity to get rid of the towels and fabrics I didn't like anymore and put them to good use. It is a FABULOUS ironing experience. Even though I don't iron that much I want it to be good when I do.)Moving on to my thoughts about how the Alumitek cover could be made perfect, I think add two more velcro tightening straps. There are already two at the broad half of the board. But I want the nose half to fit that snugly (and hold all my extra padding firmly in place.) The directions say to just cut off any straps that impede the board operating mechanism. If there were 4 straps per whole board, allowing anyone to tighten the complete board length, there'd still be no detriment if a person had to cut off a strap that came into conflict with the board mechanism. In my case, I could run any and all straps without conflict as they just go under (which is really above, if the board is opened) the mechanism. The other thing is the color. I like that it's plain, but the grey is a little dark and gloomy for my personally taste. A lighter grey/taupe would be cheerier. Even better would be the verdegris color of oxidized copper with some taupe/grey added. That's always pleasant.Anyway, you will NOT be sorry if you buy this pad. It is worth the price.BTW, I made these suggestions directly to the company and quickly got a reply that was not a form letter. How nice in today's world! So, they are really on top of their game. Information about upcoming improvements was shared and an explanation of why color change is not as easy as a trip to Joanne's Fabrics. It is a special heat tolerant fabric.

My Polder ironing board is 47" long and 15" at its widest. This cover is perfect. I love the fact that it comes with 3 sets of straps in addition to the bungee adjustment for a perfect tight fit. It is not too thin, not too thick, just right. It was so easy to install. It looks very durable but time will tell. The fact that it is a solid color and dark gray is actually very forgiving. It was very well packaged and came with a set of instructions. You can tell it is a quality product and it comes with a 2-year warranty. What else can you ask for? I am delighted with my purchase and can only highly recommend it.

I bought an oversized ironing board from IKEA years ago and the pad/cover has gotten extremely worn over the years. I couldn’t find the same board or cover online. I purchased another brand on Amazon with good reviews only to find it didn’t cover the sides, which didn’t make sense to me.I purchased this cover using the dimensions of the same width. The length of the cover was one inch longer but seemed fine based on other reviews. Well, I just put it on and it seems like money well spent. A quick steam over the cover smoothed out all the wrinkles from being shipped. It fits nicely over all the sides. The drawstring and Velcro straps underneath pull the cover tight against the board. The pad provides enough thickness without being too much.Finally, no more tattered, old pad that bunches up under the clothes I’m trying to iron! As a middle aged guy, this ranks up there with the vacuum and steam mop as things that I never expected to provide me with excitement.

THE 3 STRAPS REALLY HELPED WITH INSTALL

Easy to install, heavy duty ironing board cover that will last for many years to come. This cover fit my Better Homes & Gardens 17x48 WIDE ironing board that I had purchased from W-Mart. It was wrinkled when initially taken out of packaging, but it is a fairly large cover folded in packaging, so to me wrinkles are expected😊The wrinkles were nothing that a quick swipe of a hot iron couldn’t fix😉 **I need to mention that this particular ironing board has an iron holder on the side, for those of that have this feature and need a cover to fit.**I ordered the 18x50, and my board measured 17x48. I did have to tweak the fit a tiny bit by adding sheet/mattress cover straps to the bottom end of the cover. By ordering an 18x50 cover left approximately 1.5” of wrap around on sides. The front fit beautifully as is, as did the back side. It fit well w/out the extra straps, but I like the cover to be super tight w/ no chance of slippage whatsoever. (The straps hold the cover more securely around the board near the iron holder.) The Velcro straps & elastic cording do a remarkable job holding the cover elsewhere. This cover is superbly made and is by far a luxury cover compared to the flimsy cheap one that my BH&G board came w/ brand new. I don’t foresee any issues w/ this cover, my Rowenta Pro iron glides like butter over the surface🌟

FINALLY THERE IS THE PERFECTLY DESIGNED IRONING BOARD COVER ! FITS PERFECTLY, 4 VELCRO ADJUSTABLE STRAPS THAT SECURE THE ULTRA THICK COVER. IN ALL MY YEARS OF IRONIG THIS COVER GIVE ME THE GREATEST JOY. HOLDS THE ITEMS IN PLACE ESPECIALLY SILK. I WEAR LINEN ALL SUMMER & IT IS NOW A PLEASURE TO IRON !!!

Would not be without this item. Easy to install, wears excellent, and the best cover ever made!

Perfect fit! Dimensions matched the description + smooth surface makes it easy to iron out the wrinkles from your clothes

It fit my ironing board no problem. I had gone by the measurements given to us on line for different size. It is nice and thick. I have never seen one as good as this one. I would highly recommend to anyone wanting a good quality ironing board cover to go with this one. It is definitely the best and you won't regret your purchase. Sometimes, paying a little more is worth it and in this case, it is.

After purchasing a steam generator iron my old ironing board cover wasn’t up to par. The first time I used my new iron I had a puddle of water under the board as the steam had just passed through it. I loved the fact that I could just measure my board and order the exact size I needed. The first time I used it I was amazed at how well it fit the board and how the steam did not pass through it, the steam and heat is reflected onto the garment and makes ironing easier. I wish this product was available as a cut to size pad so that I could make a custom board for when I am sewing and need a bigger surface.

This TIVIT ironing board cover is just as described. The company rep. who replied to my email inquiry was extremely helpful in figuring out the proper size of cover for my ironing board. They were quick, friendly, and went above and beyond to help me. Good quality cover, well padded, and doesn't slide around. Would recommend based on my experience.

This cover is thick and fits my odd-size ironing board perfectly. It was easy to put on and although I've only been using it for a couple weeks, I'm super happy with it.

Fit perfectly on my ironing board. Straps keep it snug. It’s great for quilting.