Houkr 3D 0.4mm Stainless Steel Nozzle Extruder Printer Head + 1.75mm Stainless Steel Nozzles Throat for 1.75mm Filament E3D V5-V6 3D Printer 10pcsSpecification: Extruder Nozzle ●Thread type: M6●Height: 15.5 mm●Width: 7 mm●Material: stainless steel●Input filament diameter: 1.75 mm●Nozzle output diameter: 0.4 mm●Installation: external M6 thread connection●Filament supported: ABS/ PLA/ PETG/ carbon fiber Extruder Throat●Outer Thread : M6 M7 ●Nozzle Throat Outer Diameter:6mm ●Nozzle Throat Inner Diameter:4mm ●Teflon Pipe Inner Diameter : 2mm ●Length : 22.5mm ●Filament Diameter : 1.75mm ●Material : Stainless Steel How to Replace Nozzles ?1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.Packing List:●5 x 0.4mm Extruder Nozzle ●5 x 30mm Extruder Tube Warning: Small Parts, Keep Away from Children!Why Choose Us？24-hour feedback excellent customer service.Any purchase doubt please ask in the Q&A, we will answer it as soon as possible.
A**Y
Pretty good in my book.. after hating life
The ugly firstI couldn't get a handle on printing with the PETG and ended up killing four nozzles and two throughts. Was my first time using the stuff on a newly installed V6 clone. For the books experimenting/learning without calibrating first is a a bad idea and these aren't at fault.The goodOn the remaining nozzle, it has had almost an entire roll of PLA go through it. When shining a light through them the bore doesn't look like rifling marks I've seen in others.VerdictI like these and will order them again next time I need nozzles and throughts for my V6
R**R
PLA Jams 1/3rd the way through print time, fails the print every time it does
I have had nothing but PLA jams occurring inside the hotend ever since installing this. Sure, you MAY be able to skirt on by doing a single xyzCalibrationCube, but god forbid you try to do anything taller or in larger quantity than that! I have lost my mind trying to find out what was causing the prints to fail 1 hour into a 3 hour print, going through all the possible causes of this heat creep. I am never again trusting any 3D printing part sold on amazon.
J**H
The heat breaks seem to work fine, havent used the nozzles yet
The heatbreaks are great, fit perfect. The nozzles have a little bit of extra flatness on the bottom I normally don't like.I have not used the nozzles as of yet.
G**S
You need PTF oninlet of throat
Pretty decent needs throat polishing.Other than that good heatbreaks.
S**S
Big waste of money inconsistent
Inconsistent in size inner diameter of nozzle is bigger than the inner diameter of the shaft don't waste your money I know I did
A**R
avg
avg
J**R
Clean
Stay clean
D**.
Very nice
Very nice nozzles and heatbreaks. Had to rebuild some V6 clone hotends and these fit perfectly.Nicely machined, no burrs or cross-threaded parts. Would buy again if the need ever arose.
D**H
chunky threading
Was not happy with the throats. very gritty threading.The nozzle were fair though so at least not a total loss.
A**R
Great noozle but the heatbreak is NOT compatinle with PRUSA
Great noozle but the heatbreak is NOT compatinle with PRUSA
D**L
Great deal thank you
Another great deal ..love it
C**N
Conforme
Conforme
Trustpilot
5 days ago
1 month ago
