GuliKit TMR Magnetic Joystick Replacement Kit for Xbox Series X/S Controller,Anti-Drift Stick Repair Module with Thumbstick Caps, Soldering Required

These are high quality replacements for the original sticks and work perfectly, even with the deadzones in games completely turned down to 0. They should last basically forever too. Definitely worth the price. The replacement stick caps feel a bit low quality, so I just reused the ones that were on the controller to begin with. Don't be intimidated by having to solder these on. Soldering is extremely easy and you can learn how to do it from watching a couple YouTube videos. Desoldering factory solder is a bit trickier, but you could probably go to an electronic repair shop and have them install the new sticks for somewhat cheap if you don't want to figure it out yourself.

This product works very well, I have high hopes that stick drift possibility will be eliminated entirely but only time will tell me that, I will update in a couple of months. As for now there is a trade off that buyers should be aware of and that is that these sticks require you to use the thumb-stick provided, it doesn’t screw on like the factory sticks instead it pushes on directly. It makes me concerned that it will come off during gameplay. This also takes away the ability to swap out the magnet sticks this controller comes with so there is no more stick customization what comes with this pack is what you get. In my opinion this is a fair trade for never getting stick drift again if the advertised feature is to be believed but once again time will tell. As for installation, this is not something that the average Joe should try you need at least basic soldering equipment and knowledge. If you don’t have that take it to a local repair shop and ask about possibly installing these for you. In conclusion so far these sticks are great after recalibration and I will be buying again for more controllers in the future. ( I was not paid to make this review )

The sticks themselves work great. They feel smooth and responsive. After initial calibration I can set my deadzones to nearly zero. The install is the only part I didn’t like but it’s not the fault of the manufacturer. It’s purposefully designed by Microsoft to be difficult to remove the stock sticks. If you don’t have a very good soldering iron, solder sucker, and skills, I would highly recommend taking it to a professional. My install almost went south, as I had to bypass some connections since some of the solder pads were destroyed when I removed the old sticks. But if you can someway get these in your controller, I’d highly recommend it.

These are a great upgrade for a DualSense Edge, but you definitely need to take your time with the installation. Once installed properly, they work excellent—smooth, precise, and they feel like a solid long-term fix. Overall, a really good investment if you’re comfortable opening the controller (or have someone skilled do it).

These PS5 thumbstick replacements are amazing. It took me about 3 hours to install because im not a professional solderer. Removing the original thumbsticks was extremely difficult and I ended up just taking pliers to them after removing as much solder as I could. The pliers were able to remove them perfectly. Installing these new thumbsticks was very easy and soldering them was easy as well. Buy yourself a desoldering heat pump and soldering kit with flux and you should have everything you need. I even upgraded the battery to a high capacity one while I had the controller open. My 5 year old controller will probably last another 5 years now! Very pleased!

Ordered this for my son's PS5 controller. Left stick was drifting and jumping around and verified with a few different testers. This is definitely NOT a plug and play install, so you need to be familiar with soldering and desoldering. I have built keyboards for a hobby for a while so overall this was not a difficult install for me. Only issue, I forgot to remove the ribbon cables and got the iron too close, so this repair cost twice as much in the long run. Once everything was done, the calibration was only slightly off and the GuliKit calibration site got them dead on. My son is now in love with his controller again and having been using his mom's PS5 controller while he waits, he says he can feel a definite difference between his upgraded controller and the standard one. I'll be keeping this kit in mind for the other controllers in the house at a later date.

Works perfectly! I’ve always bought favor union tmr sticks for the previous controllers I’ve been working on, but I heard from many that Gulikit was the best of the best. Figured I’d drop the money on one just to try it out, and sure enough I see what they mean! The sticks were about as easy to install as the previous ones, but the movement of them feel JUST like ALPS sticks that were in here previously. Calibration was no issue as I just used the Xbox accessories app to fix them right up, and hopped right into my games! The controller now works flawlessly and will never have a drifting problem again!

Works amazing. Huge upgrade over the stock joystick POTs. Magnetic sensors, so it’ll never wear out. However, be aware it will require soldering skills. Using a solder sucker tool was really effective for removing the solder from the posts. Follow the iFixIt tutorial! It’s great!

Joystick s’arrête des fois un peu sur le côté, ce qui me fait quand même avoir du Drift

These have breathed new life into my limited edition xbox controller that kept getting stick drift issues. Even after disassembling and cleaning the potentiometers twice on the original, drift would come back after a couple of months. Couldn't bear to part with my beloved controller so fitted these into it and have had zero problems since. Very happy that the original thumbsticks are compatible with this, so the external look of my controller hasn't changed. Installation of the first took a long time as my desoldering pump was old and clogged, but once I replaced that the second one was replaced in 10 minutes! I will say that the installation is for more experienced solderers, but worth the time. Feeling very confident in the quality of these sticks, while they have a slightly different feel to the original, it's only noticeable for the first 30 minutes, then you no longer notice it (and they may even feel better than the original). Calibration was no problem and handled by the Xbox Accessories software, requiring no fiddling like a hall effect joystick would. Very happy with this purchase and the time I took to install them, now I no longer have to worry if my beautiful controller is going to become an annoying burden every few months!

A la medida para control dualsense edge, funciona excelentemente, otorga mayor precisión. Fácil de instalar y calibrar.

Perfettamente funzionanti! Spedizione veloce!