3D Printer Filament, Marble PLA Filament 1.75mm, Marble White 3D Printing Filament, 1kg

I ordered this filament with very very low expectations. When I opened the box and saw the color through the plastic I thought it was a decent looking purple. It sat while I ran through a dozen other prints. I was about to start a print and realized that there wouldn't be enough on the roll of another filament to finish but I thought back to the purple and thought I'd see how it would look with the filament I was already running when that one ran out. Soon as I ripped the package open to finish my print job I was able to really see the color of this filament and I was impressed. I was even more so when I saw how well it printed on top of the other filament and the colors went together. After I let it fly solo for the print I added photos of and a few others. The glow doesn't show up on camera well but it lit up a pitch black hallway after only about a minute charging in the sun. I don't like purple but this purple is really nice and I have a long list of prints it WOULD be perfect for. It prints great, the color is great, and I'm happy with the glow from the little testing I've had time for. BUT, they need to do this with more colors in petg and maybe other glow colors. That's my only issue with the filament.What's kept me from ordering 2 or 3 more rolls of this filament is Amazon. First they tried to sneak and change the delivery date without my noticing (I NOTICED!). after that date came and went thru changed the date but did notify me. That date came and went to which they notified me that it would arrived between X date and Y date and they couldn't offer me any compensation unless it arrived after Y date. It FINALLY arrived on Y date. I did give Amazon one more chance with another order but they messed that up too too the point I had to candle l cancel it and start ordering my filament from another source. I've been having issues with Amazon for some time and it only gets worse no matter how many times they promise to do better. So much for being a prime member and long time customer.So sadly I probably will not be ordering more of this filament despite how much I like it and I have people asking for prints done in this filament.If you don't have issues with Amazon delivering your orders, DEFINITELY BUY THIS!

I was a little apprehensive to point with this filament, I've had issues with other no name brands. Set the printer up like I normally do for petg, printed off a test cube and tweaked a few settings and off it went. 28hr fairy tree house pot for my dayghters birthday. Had a minor issue with the first attempt, color was kinda off and it was popping quite a bit. Unfortunately I didn't notice it since I was at work.... got home and it was pretty much a mess. Tossed it in the dryer over night, hooked it back up and restarted the print. (I let it feed from the dryer to the printer) fantastic! Looks awesome, kinda see through, but brilliant purple color and the metal flakes just set it off great. True test we left it sit in our bedroom window,(this was hard as it's a gift and her birthday is a few months off yet, didn't want her to see it.) Checked it out in the evening and it had a great green glow! I normally leave pretty early for work, checked it out again didn't make it till morning but I was pretty impressed either way. Only downside was I burned up about 80% of the spool between the test print, failed print and the final print. I'll have to get more when the need arises.245c filament temp, 75c bed temp (sunlu magnetic bed plate.) I could not get it to stick to my pei textured or smooth bed plate or my textured steel bed plate. Stuck really well to the sunlu build plate. Printing at 80mm sec base .2mm adaptive layer height.

I thought for the price is was going to be 1kgOpened it and it was a 40% narrower spool, prints clean fast color transition, but it was 600g I would be buying casses and cases if the spools were not 40% smaller

Overall a pretty good and very cool filament. This is a well printed benchy with very minor stringing. It was printed on an Ender 3 pro with a 4.2.7 board, a glass bed, an all metal hot end and an all metal extruder. The filament is in a Sunlu filament dryer. The slicer was Cura 4.13.0.4 Nozzle.2 Layer height255°C Hot end75° Bed2mm Walls10% infill50mm/s Print speed2mm RetractionNo supportsI'm very happy with the way this benchy turned out. It's not perfect but it is very acceptable and I consider it a good print. Like I stated there was very minor stringing which can probably be tuned out with slightly higher retraction or lowering the print temperature. Dimensions were spot on but accuracy is attributed to the printer being tuned. The bridging worked well with virtually zero droop. The layersstayed together and never separated, and it adhered to the bed without issue. I printed four heat towers prior to attempting any other prints. I strongly encourage anyone attempting to print with this filament to do the same.The only issue I have with the filament is that it's so unique I'm not sure what I want to print with it after my original plan.

Bedingt durch die Beschaffenheit des Materials sollte man beim Drucken bestimmte Regeln beachten. Dann bleiben Enttäuschungen zuverlässig aus (vgl. Hinweise unten).Ich habe das Filament mit einem Creality Ender 3 S1 verarbeitet. Als für meine Erfahrung ausreichende Drucktemperatur sind 235°C für die Nozzle (mindestens 0,4mm) und 70°C für das Druckbett eingestellt worden. Die Druckgeschwindigkeit betrug 50mm/s (25mm/s für die erste Schicht).Die Haftung auf dem Druckbett (PEI-beschichtete Federstahlplatte) ist hervorragend, wobei die nachstehenden Hinweise sicher hilfreich sein können. Die Bauteilekühlung habe ich auf 50% begrenzt (keine Kühlung während der ersten Schicht).Die Druckergebnisse sind tadellos, die Schichten haften gut aneinander. Das Hairing hält sich in Grenzen. Die Nachleuchtdauer des grünen Farbanteils ist recht kurz. Auch will diese grüne Leuchterscheinung nicht recht zur Grundfarbe Violett und dem Glitzereffekt passen.Gleichwohl finde ich das Filament rundum empfehlenswert. Ich würde es jederzeit wieder kaufen.Hinweise:> Das Filament enthält glitzernde Partkel, die grundsätzlich die Nozzle verstopfen könnten. Auf keinen Fall sind kleinere Düsendurchmesser als 0,4mm verwendbar. Das ganze Hotend sollte hochwertig sein und innen ideal glatt sein. Ein kleiner Spalt durch eine nicht passende und unzureichend tief eingeschraubte Düse verursacht eine andauernde Verstopfungsneigung.> Die Verwendung eines Direct-Extruders ist gegenüber einem Bowden-Extruder vorzuziehen (meist abhängig vom Druckermodell), da PETG gegenüber PLA etwas elastischer ist, was sich auf den Retract-Vorgang auswirkt.> Vor der Verwendung des Filaments (und natürlich auch sonst) ist ein möglichst genaues Leveln des Druckbetts durchzuführen. Eine passende Anleitung gibt es für jeden Druckertyp beim Hersteller und in einschlägigen Foren.

I did notice this filament doesn't seem to like bridging, or narrow parts of models, the "venting" on the prints pictures didn't print well without modifying the file to simplify it (don't know why prusa made it can mplicated...) It also had more difficulty sticking to the bed. I had a clog at about 90% of my first print, and none in the next 2/3 of the roll, I attibute this to the large sparkles in the filament, and believe it is a natural hazard.For how specialty this filament is, it is an amazing quality, but it does have a few quirks. I will be following this mfg, hoping they have more. The pictures are a good representation, it does glow nice and bright! The dial wheel was printed in generic pla glow in the dark blue.

L'effetto del filo stampato è bello,il problema è che il diametro non è costante e crea problemi durante la stampa.

The color is really nice -- the green is somewhere between a dark green and a green-gray color. It does transition through to orange (a bit peachy) and yellow. I found that no matter the temperature I was printing at I was not able to completely eliminate stringing but printing at 205 yielded the best results and the stringing was minimal enough to be removed with some post-processing. I did have some issues with bed adhesion with this filament and it took a lot of playing around with settings to finally have completed prints. Though I was able to eventually get to the point where 95% of my prints were successful it was a lot of tweaking and quite a bit of wasted filament.

Not suitable for 0,4mm.Couldn't complete a single print.Nozzle was completely clogged: I had to replace the nozzle.The filament feeder was jammed also when unloading.