3 Step Gun Care System Includes .75-Ounce TW25B Gun Grease, 1-Ounce MC2500 Gun Oil, and 2-Ounce MC25 Gun Cleaner and Degreaser (3 Piece)

Very good product

There are as many gun care products out there as there are theories for what works best. Some work & others not so much - they may even damage your guns. I've tried a few systems over the years but usually stayed with Hoppe's, CLP & FP-10...until now. Go to Mil-Comm's website. Read the research and testing that went into this care system. No, it's not as cheap as a quart of 30wt Valvoline. That's because it's formulated for today's weapons and gun finishes. If you buy it, read the instructions and follow them. Don't just put the gun oil/grease on over your old gun oils.I particularly like the gun grease. Don't let the word "grease" fool you. A small dab on slides makes them ultra smooth and if you rub it into the outer surfaces of the weapon and then spi-polish it off like Mil-Comm recommends, the surface is protected for a long time without a greasy finish that catches dirt or lint. I used to see the Nitron finish on the slide of one gun get dry within days of a clean up and oiling. It's been weeks since I switched to Mil-Comm. If you care about your guns and your time is valuable, this gun care kit provides far better protection (most important) and less time spent in gun cleaning. Get it...you won't regret it.

Disclaimer: I am a relatively new gun owner. That being said I started out using a CLP like most do, and honestly was pretty happy with it. The reason I tried mil-comm was several reviews I read about how well it made the action function in semi-auto handguns, among others. Also I liked that they carry the stamp of approval from the NRA that says a lot to me. So I purchased the package pictured to try it out. As recommended I cleaned my gun fully with isopropyl alcohol and applied the products as instructed. I seem to use mainly the grease not just on contact points, but on all metal surfaces to protect it. The oil is great for those hard to reach places, and has never run all over. So after several range trips and cleanings, I have to say I'm sold. As described much more of the residues will wipe away w/ dry patches. Even though before with a CLP I didn't have cycling issues, the action is noticeably smoother. I think with any modern product you're in good shape, but for me mil-comm is it!

This is a very good kit for gun care, if used as intended. The substances seem to be of a good quality. My pistol is clean enough after using them. I consider that the only draw-back of this kit is the gun-oil dispenser leaving too much lubricant; a metal needle would be preferable. Also, the cleaner will run low faster then the other two fluids in the kit, but a refill is available. Recommend for basic guns maintenance.

I just reordered this set - I have been very happy using this on my firearms. The oil and grease work great and do no disappear after the gun has had a 100 rounds through it. What is left seems relatively clean as well. This entire system has no oder, so it is easy to use in inside living areas as opposed to being banished into a hot or cold garage.

My sig p320 came with a small sleeve of this grease in the case when I bought it but I didn't see it right away. As a first time pistol owner I had a steep learning curve for proper maintenance for my firearm. I watched a lot of videos online as well as consulting friends on the how to's of cleaning and maintaining my pistol. Overwhelmingly milcomm came up as the product of choice and now after a year of heavy use and many more firearms in, milcomm is holding it's end of the deal. This three pack is just what anybody needs after a long day shooting. It allows me to clean and lube all of my firearms easily and well. Very nice product.

I was extremely pleased and impressed with the Mil-Comm grease. I applied it to the barrels, bushings, and slides of my pistols using a Dremel. The instructions said to spit-shine it on the parts to be lubricated. After applying the grease, I used a Dremel with a buffing pad to give it a really good shine. This resulted in a nice dry finish that was extremely slippery and that did not collect carbon and dirt. Thus the guns do not need to be cleaned as often and they stay much cleaner. When I do clean them, I use the Milcom cleaner spray to remove the old grease. In my opinion, the MilCom grease is better than any other lubricant I have tried, and I strongly recommend it (especially) and the MilCom oil and cleaner for all gun owners!

All three of the products in this kit are outstanding. Using the grease the slide seems to work much smoother and tighter. I use the grease on the high wear areas. The oil and cleaner work great also. I use the oil on a revolver. Highly recommended.Not quite sure but I believe both the oil and grease "dry" or "evaporate" over time leaving a very slick and smooth surface that is easy to clean after shooting. I shoot nearly each weekend so the guns are getting a new coat of lube often.If you are like me and have bounced around between brands and compounds, try these and you will likely be very satisfied and stay with this combination for quite a while.