Yeston GeForce RTX 3050 6GB GDDR6 LP(Equipped with a Half Height Shifter) Graphics Cards pci Express 4.0 Video Cards Desktop Computer PC Video Gaming Graphics Card

If you have a Dell SFF 3070 or 5060 and want to make it be a gaming pc, this is the best graphic processor that fits in the right port. It clearly is not the cheapest, but it’s one of the only with 6 gigabytes. This really gives the computer the ability to play some high end games at higher levels of processing than other gpu’s which fit and almost all only have 4 gigs. If you want the best for the models I have mentioned, then stop looking and just bite the bullet, you will be poorer, but most importantly won’t regret it. Finally if you want the computer to run its best, and not sound like an airplane landing with the stock cpu fan, you need to bring as much air into the case as possible. So add a front fan and keep the side panel off. If that look without the side panel upsets you, then cut a 4 inch hole near the power supply and gpu towards the rear and add a usb powered fan like I did. No matter what game I play, my temps never go past 50’s. Yes the computer will not be silent, but it will play good games and stay cool while doing it.

Used this on an unaltered Dell Optiplex 7050 in a effort to turn it into a gaming machine, and holy cow am I happy and kinda surprised. Low-wattage mini PCs are really hard to build specifically in regard to finding a good GPU (a 180W psu is quite the ball and chain). You wanted a good GPU? THIS THING CAN RUN VR!!! It's insane. A single-slot, 75W, Low Profile card that's capable of Ray Tracing too?? (I know its a 3050, but still). There is seriously nothing on the market like this---minus the NVIDIA A2000, but that's legit $1.1K---so this part fills a huge gap in the PC making hobby in regard to smaller, eco-friendly builds. Insane value for performance. I had my doubts, but so far, I was proven wrong. Thank you Yeston, or whoever your parent company is!

yes it's a bit expensive as a 3050 but it's the form factor, it fits right into a dell optiplex sff with even a 180 watt psu. it worked right out the box and runs my game medium to high very well. it doesn't require any external power which is great for office pc's with proprietary cables. i would recommend this to anyone trying to build a low profile sleeper pc.

Single slot card fits in the 16x slot. Much improved fps over previous unit. Did not need to upgrade PSU, stock is working fine. Nice card, recommended.

Great little card. Compact enough for ITX and mini builds. Great for a home streaming box/home server and gaming on low to medium graphics on modern games and great for playing older games or emulation. Easy to install and does not require and external power cable and is powered from the card slot.

It works pretty good in the Hp ProDesk 600 g5 sff I have, since the space is limited. I can game some games I couldn’t before I installed the yeston rtx 3050, the next thing I’ll probably do is add a 32gb RAM. The only problem I had was unscrewing the bolts to take the bracket off and put the low profile bracket on. I feel it should have already came installed. Other than that, I’d say it’s pretty good!! And I didn’t have to plug it into anything extra for it to power up.

Good card for small factor builds ,you need to download a program to undervolt it ,runs hot but it's a great low profile graphics card,I will buy again soon

Works great. Fits in Minisforum-01 perfectly. Though expect issues with overheating if you game with it.

現在入手できるロープロ1スロットGPUの中ではこれが最強。知らないブランドだから心配はあったが問題なく動作している。

このGPUは、拡張性のあまり良く無い、中古の法人向けスリムデスクトップへの増設に対して、数少ない選択肢のひとつだと考えます。中古の第八世代、第九世代、第十世代のスリムデスクトップであれば、ロープロファイルで1スロットの拡張スロットに適合しますから、内蔵グラフィックではやりにくかったGPU利用の様々なことが実現出来ます。 わたしも正式な拡張スロットにはなっていませんでしたが、x16のバスがある場所で収められる空間を確認して増設しました。ただしカードのねじ止めは出来ない場所でしたので、どう処理しようか只今思案中です。 ただし、pc内部のスロット規格の割り当てや、奥行きで、入るスペースがあるかどうかは確認しないとなりません。 それとやはり価格的にニッチな商品なので、もし拡張スロットの規格に余裕がないけれど、gpu利用をどうしてもしたい方に一つの提案としてあると考えています。

HP DeskPro600 SF で物理的にも電力的にも使用出来るグラボはこれくらいしかありません。PCIe x16のスロットが端っこなので隙間が無く、2スロット使うグラボは入らないのです。 StableDiffusionもそこそこ動きます。まあ、それが目的でもないのですが。 放熱がちょっと心配ではありますが、今のところ問題なく動いています。 ハーフハイトのスロットカバーに変えるには関係なさそうなネジを全部外さないとダメなのでちょっと減点です。