BOSCH 69136 Original Equipment Electric Fuel Pump - Compatible With Select Ford Excursion, E-350, E-450, E-550, F-250 Super Duty, F-350, F-450, F-550

Used this pump to do an E fuel kit on my OBS 7.3. easy to wire and install. You will need a fitting off of the original pump or someone else reviewed has the proper fitting linked. Handles abuse well. Had my regulator stick shut and it did run at 120 psi for about a day or two can’t complain about it.

As good as it gets for a 250 super duty! Perfect fit, high quality, exact clone of the $350+Oem!.. (1 **NOTE**-you will most likely need different outlet fitting. Almost always different thread than your old pump, and this Bosch does not include it..output thread IS M10X1.0 (don't spend $30 at some diesel mod site...can grab it right here for $8! "WALBRO 128-3012 fuel pump fitting" perfect fit, no leaks, ships free WAY faster than a diesel mod site too...@ barely 1/4 cost!

Works great so far. About 1 month with no issues. I was burning up fuel pumps every week that I got from orielys. I ended up dropping the tank and cleaning it out, I found lots of sludge/tar inside. And my fuel bowl return line was all gunked up the fuel was never coming back to the tank and was causing the pump to constantly be overworked and burn out. Now that everything is cleaned I opted for the Bosch and have the orielys pump in the toolbox as a spare.

It got here fairly fast and it’s put to use. I would buy again if I needed.One

This one is made in Czech Republic - the original off my 2001 F250 was made in Germany. It lasted 205k miles. We'll see how long this one lasts. It definitely solved my fuel delivery problem. It does not come with the output fitting. I was able to remove the original fitting with copper washer, apply a sparing amount of Gaseola thread sealant and install on this new pump. I took it for a 15 mile test drive. No leaves, much quieter than the failing original. No issues at high RPM or hard acceleration. I am keeping the warranty card, just in case.

Ome product at a great price

Excellent replacement, same as the OEM pump exactly, for my failed pump. Note, as stated in other reviews, this is the pump only and you will have to reuse the quick disconnect fitting extension on the outlet side as well as the pump bracket and insulator. You also have to be VERY careful removing the plastic retaining clip on the intake side as these are virtually impossible to find and Ford wants you to replace the entire fuel line from the tank to get the clip which is B.S but normal for a dealer. This is an easy 30 minute project for a handy person, you will need a fuel line disconnect tool for the outlet side fuel line these are available at most automotive stores for just a few bucks. There are some very good videos on youtube about the actual removal and reinstallation process.

Nice, good OE pump got my fuel preasure back up to what it should be.