WAGNER Cordless paint sprayer Wood&Metal Sprayer W250 18 V (Battery and charger are NOT INCLUDED) for wood and metal paints, container 800 ml

I almost never write a review but this little paint sprayer is excellent. Super simple to operate and gives a fantastic finish. I did three practice pieces (the backs of some Besta cabinet doors) before getting the hang of it and spraying near flawlessly. I couldn't understand the stick doodad that is meant to help you dilute by 10% at a time, so I just used a digital kitchen scale instead. Cleaning was straightforward, every part comes apart easily and can be washed. I love this paint sprayer, great value for the money. I'm sure there are fancier sprayers out there, but for my needs it's just the thing.

Good quality product, easy to use, used to treat a large summer house taking a fraction of the time it would have done with a brush, leaving an excellent finish.

First, let me say that this was the first paint sprayer I have ever used after hearing bad reviews of paint sprayers in general from other people, I’m a perfectionist and I hate painting fences. I was using water-based sprayable fence paint diluted by 5-10% water (as per the instructions) onto brand-new unpainted fence panels. It is also worthy of note that I got through the paint at about twice the rate the manufacturer suggests you will on the side of the container, so make sure you buy enough.The spraygun itself is exactly as good as I could’ve expected it to be for £50. Easy to set up, easy to use and delivers a good finish, in general. Also very easy to clean. The only slightly negative side I have for the gun is that the pot which holds the paint is quite small, so you find yourself having to stop painting quite quickly to refill the pot again, but this is only a small downside. If you want a paint sprayer to do a few fence panels a year, this has worked well for me recently. A good paint sprayer. However...My question to you is whether you really need a paint sprayer depending on your needs and how much of a perfectionist you are.The gun is very good at painting flat fence panels which are not rough to touch. Because the spray comes out in quite a fine mist, it is not very good at giving an even and thick finish on the rougher areas as it is on the smooth areas of wood, and in the corners and the angles of the fence panels. The paint can also tend to run quite quickly if you cover an area with too much. You will therefore find yourself having to apply a second coat in order to get a deep and even finish. You will also need to use a brush to touch up the harder to reach corner areas of the panels. And depending on how much of a perfectionist you are you will also have to spend a reasonable amount of time masking up the areas that you don’t want to end up overspraying onto. And don’t even think about using this (or probably any spraygun) to paint the fence when there’s anything above about a 5 mph wind.In summary, if you are spraying a lot of flat fence panels where you don’t have a concern for overspray going onto your neighbours conservatory, kickboards which are of a different colour to the fence panel itself and you’re not a perfectionist about the detail of having to use a brush to get into the corners to get an even, thick-paint look then using a spray gun such as this will be right up your street because it is undoubtedly faster than doing it all by hand - and you won’t be disappointed with this model.But if you are a perfectionist and want a very even very high quality look to your fence panels, you will probably spend just as much time masking up areas you don’t want to spray by accident and touching up the areas that the gun can’t get to very well with a brush, so you might as well just do the whole thing by brush.

Why did you choose this product over others?:Really good, especiallyas its a proper budget ption... I was painting furniture and it did an awesome job..It takes a little practice so if you are painting furniture have a practice on some old card first till you get the hang of it..

Used this to spray clear solvent based fence treatment which fortunately did not stain the concrete posts.On the minimum setting it seem to get through the container quickly compared to brushing, however, far easier than brushing.I watched videos of how to clean it afterwards but upon reassmbly, two rubber gaskets fell out, taking an age to work out how to get them back, the one where spring/valve is shaped with a curved top but seemed to have oversiszed and wouldn't fit properly. I probably spent more time reassembling it than using it.Next time, if I again use a solvent treatment I'm going to to spray white spirit through it instead of taking it apart.

Great product . Efficient painting

The Wagner W100 says it is suitable for the following :-Suitable for wood and metal paints including; gloss, satin, undercoat, stain, varnish wood preservatives and many morePerfect for spraying fencing, decking, garden furniture, doors, skirting, windows and other wood or metal surfacesWhen I bought this gun the first job on my list was to spray the top of a small bedside cabinet to match an existing one but to my horror found it only produced a splattering orange peel finish. I diluted the paint and sprayed again. Slightly better but not much. I diluted the paint again until it was like a thin single cream and tried again slightly better but again not much .I tried every adjustment possible but in the end the only solution was to spray the surface flat rather than angled towards the gun and to cover it with so much paint that the splattered blobs flowed together and settled like water. This was the only way to get a flat result but the downside is that three days later the paint is still not dry as the amount of paint I had to build up to get it to settle and flatten was so much so that I don’t know how long it will take to dry . After three days the paint surface has formed a film over it but is still soft inside and touching it make finger prints. It will probably take weeks to harden thoroughly at this rate which is a real problem as the table is one of a pair in a guest’s room of my B&B and the clients are coming in tomorrow.All my other spraying projects which I bought this spraygun for will now have to be abandoned.It may be O.K. for spattering creosote on a fence (I would assume) but it certainly is no good for fine spraying things like furniture, doors, skirting or windows as it says on the tin.It would be helpful if the manufacturer posted a warning that this gun is not suitable for fine surface spraying.I hope this review will be helpful to others.