W603 Motorcycle Carplay Screen, Wireless CarPlay & Android Auto for Moto, Remote Control，6.3" Waterproof Touchscreen, BT Trans, GPS Navigation, Siri, G00gle Assistant

The Carpuride W603 Motorcycle CarPlay screen works perfectly! It connects easily to my phone, the display is bright and clear even in sunlight, and the touch response is smooth. Navigation, music, and calls all work great while riding — super convenient and safe. The build quality feels solid, and setup was simple. I like it a lot and highly recommend it to any rider!

I have a ‘16 GSA with the factory nav mount. You can just mount the Carpuride onto the factory mount (it clips in with nothing else), but I questioned if it would stay on for rough roads.. An easy solution - almost as if they intended this (but it’s not in the manual that I found and the screws they included were too short).. There are 4 screw holes on the Carpuride that align perfectly at least with my ‘16 GS’ factory holes around the nav. The problem is those BMW screws, even if turned around, are too short AND the wrong thread size. Carpuride came with 4 screws of the right diameter but 1) they won’t fit through the bmw nav holes and 2) they’d be too short. Easy solution: 1) Get 4 new screws of the photographed size (5mmx40mm 0.8 pitch thread). 2) Drill the plastic holes in the 2 OEM GPS mount pieces just a bit larger so the new screws will slide through. This is plastic so easily drilled. On the larger piece drill from the rear as the front has these little inset metal pieces (they’ll come out once drilled). 3) Then assemble again, I’d advise a little blue locktite on the threads since it’s a motorcycle and will vibrate (and that will keep the screws from coming loose). Now it’s both bolted to the bike so it can’t fall off - and it’s also in the GPS cradle and locked with your key. So there’s a little theft deterrence too if someone unscrewed those 4 screws. 4) On my year (‘16) GS I found the bars (brake reservoir) would bump the nav at full lock. To prevent, I simply cut the 2 factory zip ties on the wire to leave more slack, then I could slide the entire mount assembly an inch or two further to the left (and more centered) which allowed clearance on both sides at full lock. Tighten your 4 screws and you’re good to go. And the GPS is great - super easy to use, just sync to your phone in seconds and it’s ready with all the normal CarPlay functionality. I also connected a Cardo headset so I could hear things. Highly recommended!

Pretty simple install, I wired mine to a fused distro box in my fairing I setup for accessories. Little slow on initial boot but haven't had any connection issues or lagging so far with AA. Works with both my Bose earbuds and my Pioneer in dash radio. Only complaint so far was the sun visor was missing the install screws, I used the ones from the wired remote which didn't fit over my air cushion grips. Unit seems pretty sturdy, happy with the purchase.

I love my carpuride👍 believe me I tried 3 other brands and they all either didn't connect right or just flat out didn't work. Trust me, spend a little more money and get a good carpuride unit. Don't waste your time thinking your going to save money by getting a cheaper unit. I will say though that android play is a little more limited in terms of functionality compared to Apple car play, but this is just the way android auto works. No fault of the carpuride.i love mine so far, I live in Florida and have ridden through some very heavy summer time rain and it still works like new.

Excelente compra!!! Fácil de instalar y funciona a la perfección.

I have a 2019 R1250RT, which is the generation before the TFT and runs the removable Navigator VI that mounts in the center dash. I bought the BMW-specific 5in Carpuride with the thought of using it in place of the Navigator VI. The Carpuride BMW adapter mount clicks into the dash receptacle and gets power, just like the Navi VI. So as a replacement for the Navi, it works great. But it turns out I like the data displayed on the Navi VI and the ability to control it from the wonder wheel. So I am keeping the Navi VI and instead have mounted the Carpuride on the handlebars with a ball mount. They ship the Carpuride with hardware for a RAM type mount which I used, although the awesome Tackform ball that I already had is 20mm, so you need an adapter. The USB plug inside the right dash cubby won't power the Carpuride but it works great getting power from the 12v power point on the right fairing with a USB-A adapter. The Carpuride is easily visible in sunlight, the image quality is clear, and it connects reliably to my iPhone, even if the phone is in the panniers. The screen responds to gloves and overall, it works no-brainer like the Apple CarPlay in my cars. I thought about the 7in but the 5in is plenty big enough.

Nitidez y conectividad ok

Works as expected, nice quality. Screen seems a bit laggy but that is expected in the price range. Works good in sunlight as at night. Great overall