NoTubes Injector

I am not a very good cycling mechanic, but I have always wanted to learn and love doing things myself. I absolutely love riding tubeless but needed to be able to maintain that setup instead of going to the bike shop to have them do simple tasks. Since I'm not great at taking tires off and putting them back on, I bought this injector. It is very easy to use. I release all of the air from my tires, remove the core from my schrader valve, screw this one, fill it up, and put the core back in. I then air up my tires and move the tire all around on the sides and normal, so that the sealant runs all through the tire and makes a good seal. This injector is worth every penny! Even if you can take tires off/on, it will save you some time!

Works well and delivered on time.

Would give 5 stars if the syringe had an "open/closed" twist lock of some kind to keep the Stan's from dribbling out when the tube is extended. Instead I have to keep the tube bent (as shown it the stock photo) to keep the liquid from running out while I screw the tube to my valve stem. But it works well an easily allows me to fill my MTB tires with Stans every so often.

i decided to go tubeless and this product helped me in the transition!the tubeless setup is based on the following products purchased from amazon:1. taylor wheels- 26-inch wheelset (with mavic xm317 rims and deore xt hubs)2. xtreme bike & sport- schwalbe nobby nic 26x2.25, ss, tl-easy (2015)3. think fast- stans notubes 10ydx21mm rim tape4. think fast- stans notubes 2-0z sealant injector5. bike a mile- park tool valve core remover6. trail this- American classic valve stem for t/less wheelsproducts from local bike shop:1. velox rim tape 10mm2. stans notubes tire sealant- 16 oztools required:1. rim levers2. air compressorsI tried the co2 to inflate the tires, but I found that an air compressor works way better. tires are running at 35psi. I used the velox rim tape to secure the spoke's nipple access and the stans rim tape to make the rim air tight. the 10mm velox rim tape is perfect for the xm317 rims because it was narrow enough to allow exposed metal contact for the stans notubes 21mm rim tape. the velox rim tape also reduces the chance that the sharp edges do not cut the stans notubes rim tape. I used the injector to put in 2-oz of sealant via the valve stem. this process is less messy than trying to put the sealant via the bead/rim gap or mounting the bead. no leaks or loss of air after 40 miles of riding as of this post! AWESOME!!!ALL THE PRODUCTS PURCHASED THROUGH AMAZON WERE PERFECT AND RECEIVED IN EXCELLENT SHIPPING TIME!tubeless is the way to go. my wheels setup are now much lighter than with the thorn resistance inner tubes (some tubeless setups are heavy than with inner tubes, so it is a good idea to be selective in what type of tires you need for your riding style). as of benefits, I do feel the bike accelerates better and seems more responsive due to less rotational mass. this tubeless setup is mounted a on a 2000 klein attitude comp hardtail bicycle. trail on!

The Stan's filler for tire sealer works well. I keep one in my shop and one in my trail kit (along with 4 oz) of Orange Seal.

Works great and as expected. The only issues I really have with it is that the tube has a permanent crease in it near the hard plastic nozzle which limits flow until you press it with your fingers to expand - not a big deal, just mentioning. The other thing is if you put just a hair too much pressure on the plunger you risk the hose popping off the black, barbed end-piece and in-turn shooting the sealant all over the place. After the first time this happened I simply put a zip-tie around the area - no further issues other than I can no longer take that part out to clean it as easily. This is really a 4 star item because of the 2 minor 'gotchas' although the fact that it works otherwise as intended with a couple simple tweaks I still give it a 5.

Really simple design, a syringe with plastic tubing and adapter at the end, but what a difference it makes. You can refill your tires sealant without having to dismount your tire. This makes inflating back the tire a breeze, I did not even had to use an air compressor, my floor pump was enough. A little expensive really because it is just a syringe you can buy for a few cents at your drug store, tubing is ready to find also, but the tricky part is the adaptor. I guess you could cook your own at home for 10 times less the money....

I have been using Stans No Tubes sealant for about 18 months now and I love the stuff. It has allowed me to ride multiple times a week for 18 months with no flats (once I found the right tires - thin sidewalls get torn easily and no tubes cannot protect against that). I always tell my riding buddies to 'go tubeless' as I help them repair a flat or switch out a tube!The injector is a very cool product. I live in AZ so i find myself topping up the stans solution in my tires often due to the heat we get. Each time cracking the seal, carefully putting some sealent in with the measuring cup and then hoping that the tire reseals. Well no more! Just let the air out of the tire, pull the valve core and then inject the solution in, puit the core back in and pump back up. No compressor, no mess! Awesome. Make sure you read the instructions, there are some good tips in there to save making a mess (learn from others mistakes I guess!).

Lo compré porque es la misma marca que el líquido, pero me causaron un desastre mayor a cómo leHacia antes porque resulta que la boquilla es más grande que el tubo del pivote y la mitad del líquido se sale al inyectarlo, horrible

This was my first tubeless setup, the rims had tubeless tape from the factory (Roval Carbon MTB wheel set). Put on some Continental Trail King tires, inject with sealant and they worked perfectly.We recently had a puncture in our daughters swimming arm band, a 2-3mm cut on the corner, that will be tricky to patch.... I had this big bottle of sealant.... I wonder.....Yes! it worked! injecting into the armband was a bit tricky, but i got some in, inflated the band and shook it up to make sure the sealant was over the hole, after a few seconds of shaking and squeezing the hole was fixed! It has been a few weeks and working perfectly ever since.

Makes it easy to pour the desired amount of sealant into the tubeless tire through the valve.

Super practico sobre todo si tus ruedas llevan mousse.

Article acheté en prévision d'incidents à venir, donc non encore utilisé. Pourvu que cela dure.