SSL Satellites Zone1 Dish Kit for SKY/Freesat/Astra/Polesat/Hotbird/Full HD, Latest MK4 Dish with Quad LNB, 10M Twin Black Cable, Signal Finder Satellite TV Finder, Brackets, Bolts, F Connectors

Great kit. Clear instructions and easy to install. I found that to use the satellite finder on my Samsung TV I had to go into a set up menu to eneble support so if it doesn’t work for you have a look at your TV manual. The kit contained everything needed and performance is very good, we now have 100’s of channels including many in HD. Highly recommended.

Bought as a replacement for a TV aerial which gets blown off the roof every couple of years. Very complete kit arrived promptly containing everything needed. Fitting the dish was ok, four screws into the wall fixes the bracket - tip - make sure you can angle the dish in the right direction when deciding where to put the bracket on the wall. You need the sat receiver wired to the dish for the signal finder to work - there are YouTube vids on this which are worth watching. Then just tighten everything up, run the cable using ties and clips and job done. I bought a few extra bolts M6 x 16mm with locking nuts to hold the satellite dish in place as sturdily as poss. Kit is good although you may end up buying a couple of extra bits but overall value is amazing. Total time to fit about an afternoon with tea breaks, random pointing in the air and some wobbly ladder moments.

The kit was very comprehensive. Although I only needed the LNB, as I had an older style mark 1 dish, I found that I needed to buy an adaptor bracket to fit the new mark 2 type LNB. This kit was no more expensive than the LNB & adaptor bracket, so I purchased this and replaced the complete dish. Installation was very straightforward as I was replacing an existing dish. The only negative was the signal meter did not work.Fortunately I positioned the dish as per my existing dish and did not need the meter.

Bought this as we live in a very poor tv reception area, and down in a valley. TV ariel engineer advised that a new tv ariel could be fitted at a cost of £120, but it wouldn't really make any difference to how many channels we receive (we only got around 20 channels on Freeview (and 10 of them were +1 channels!).He recommended a satellite dish (same price as ariel fited) but I'd need to buy a FreeSat box (around £50 to £60).We bought one and then I thought I'd check just how much a new dish cost. Was amazed to see how low a price this full kit was (we went for 30M cable option). Arrived quick, and installation was pretty straight forward once you got the dish/bracket assembled. Check out where your neighbours dishes are pointing as a rule of thumb. Make sure bracket is installed to the wall perfectly level as this is important.Once installed, set up using the included signal meter was easy. Once tuned we got 187 channels, and all have perfect picture etc (including HD channels which look super sharp now).So chuffed with this as never realised how easy it is to install and set up the dish. This kit looks to be well made, and has everything you need to install, just need a drill (preferably with hammer action), a small centre punch to mark the holes and give the drill a good starting point. Also a spirit level to make sure the bracket is bang on level/straight.Really happy with this kit and highly recommend it.

I wanted to add Freesat channels to the existing Freeview (terrestrial) feeds available in the house. Plenty of videos to watch on YouTube to help with the dish assembly, but in truth, although the guide is brief, the setup is actually pretty straightforward, you just needs a 13mm socket to attach the bracket to your wall, and a 10mm socket to adjust the Azimuth (East & West) adjustment and Elevation adjustment once its mounted.The azimuth is the most important alignment, once you have found the satellite, it is just a case of setting the elevation to get the strongest signal. The "dishpointer" app and/or website are invaluable for ensuring you are pointing at the right satellite to start with (there are loads up there!). Make slow movements, constantly turning down the signal meter to the mid point each time it gets to maximum. Once you have the azimuth set it is far easier getting the elevation right rather than the other way around.The Quad LNB supplied will feed 4 different TV's, or 2 TV's (or set-top-boxes) if they have PVR recording capability. I purchased the kit with 50m of twin coaxial cable, which I cut in half to create a 25m feed for our living room TV and another 25m feed to the telly we have in the bedroom.All the components supplied seem to be good quality, even down to the raw plugs for the bracket and the cable clips to nail the cables to the wall. The kit supplies 4 F-type connectors with the LNB, there are 4 more F-type connectors already attached to the ends of the twin coaxial cable and two F-Type barrel joiners as well.I'm really pleased with this kit and its performance. For the price, I consider it to be great value.

good quality item at the right price