Dorman 604-970 HVAC Blend Door Actuator Compatible with Select Infiniti / Nissan Models

Works and fits. Nissan titan 2004

No more annoying clicking noise when turning on heat/ac in our 2010 Nissan Armada.

Used this to replace the blend door actuator on a 2008 Armada. Ended up removing accelerator pedal assembly, body control computer and amplifier to get a clear path to this part. None of that would be too difficult if you didn't have to be upside down under the dash to get to it. Had to have my wife put it in as my hands would not fit in the limited space.This part has functioned perfectly and quietly since it was installed about 1,000 miles or two weeks ago.The little alignment tool sounds great, but couldn't really fit it on a ratchet in the installation area. Ended up setting the system to foot vents only, removing old actuator, plugging in the new actuator and turning the vents to foot only again. I'd recommend immediately unhooking the battery as ours kept trying to adjust this blend door about a minute after turning off the vehicle. This would turn the actuator and we wouldn't be able to put the screws back in place.Overall, about 3 hours of installation between disassembly, part removal, reinstall, reassembling, and tool clean-up.This is an annoying part to replace. Hopefully this brand holds up as the previous replacement only lasted about 3 years.

I purchased an off brand for the same price a year ago and had nothing but issues. This works perfect.Difficult to install due to cumbersome location, but took under 1/2 hr after watching a YouTube video.Great quality

Lasted just over 6 months. Mechanic pulled it and tested it a few different ways. No noises when it was failing, it just died.

Did not fit 2011 Nissan armada. Temp control actuator

The area of my 2008 Infiniti QX56 was making a clicking noise in the back. After reading many posts, I found out that it was due to a faulty part. I bought this one and now the A/C works in the rear and clicks are gone, good price, easy replacement and right fit.

It wasn’t a perfect fit, but it was easy enough to modify it to make it work just had to break off a little piece of plastic

the right part and it corrected the problem

Works good

This is for the upper air mode actuator. The job was a royal pain. I had the amp, sat radio, and black BCM (?) on the immovable bracket. I tried to do it with some of that in place and just loose, but I ended up removing all the boxes with their bracket. I also removed the gas pedal, the lower plastic panel and seat to give more room. More work but less frustrating. I also removed the black plate this screws to and the cam and assembled it out of the car. I used a dremel to slightly modify the plate so the actuator fit flush. -1 star for having to modify the plate. Can't speak to longevity.

This part is for REAR Air Door Actuator - Air Inlet on my 07 Titan KC. Need part #604-624 for FRONT Air Door Actuator - Air Inlet. Listing doesn't specify.