EZ SPARES Replacement for Vacuum,Hose Adapter, 1 3/8" to 1 1/4"Hose, help inner diamter 32mm brush fit to outer diamater 35mm tube,please check the measure first

I lost the attachments for my Shark LZ601 and purchased the GIBTOOL Vacuum Accessories for 1 1/4 in & 1 3/8 in Standard Hose (not realizing that the GIBTOOL kit already came with an adapter that would have worked for me LOL), but anyway, this EZ Spares adapter works perfectly! It fits over the nose of my Shark's hose and inside the accessories. Feels thick and high quality. Suction was plenty adequate for my needs. Would recommend! But check your accessories for an adapter first! Haha.

Was working well, but since has cracked in multiple places, without anything harm other than rare normal usage.Now I can use my traditional crevice tool and brush from the old vacuum cleaner with my Shark vacuum cleaner. Traditional vacuums use 1 1/4” size attachments, but shark uses 1 3/8”, so this product solves that problem. I believe this is the case for all Sharks. 1 found the provided Shark dual crevice tool and brush kind of cheaply made (not enough bristles on the brush). Problem solved. Well made, small and simple. (I also bought a short hose directly from Shark so I can use the brush to clean in awkward areas such as the car.)

Based on the "nominal" size measurements, I was uncertain whether this adapter would allow me to use my 1-1/4" attachments on my new Shark Rocket. But it does works, and it works well. [NOTE: See addendum below]The large end if the adapter has an inside diameter of ~1-3/8" ( ~35 mm), which fits OVER the end of the Shark inlet nozzle. (If you're a stickler for details, the Shark inlet has an OD that seems slightly too small, at ~33 mm. HOWEVER, the trick is that there are some rings on the INSIDE of this adapter, which makes the ID slightly smaller, and a perfect fit onto the Shark components... Stays on snugly, but easy to remove.The small end of the adapter has an OD of 1-3/16" (31 mm), which again seems slightly too small for 1-1/4" attachments; HOWEVER, it's slightly conical (gets wider further down) which allows it to fit snugly on the inside of my 1-1/4" attachments.Possibliy this is Too Much Information for some people... but IF I could have seen an explanation like this, it would have made my selection a lot easier! So thanks, me! Better late than never.ADDENDUM TO MY ORIGINAL REVIEW: As I have used the Adapter more, it no longer holds the attachments as securely as it did originally. I've been able to remedy this by adding a layer of 2" width cellophane packing tape to the smaller diameter end of the adapter to increase its OD slightly. HOWEVER, it's hard to do this elegantly, as owing to the conical shape, the tape tends to form wrinkles. I just did the best I could to minimize wrinkles, and now the attachments are holding better. It's possible that two individual bands of 3/4" tape would work better. (Note: use cellophane, and not the disappearing tape, which is not as thick.) I feel the adapter could have been made with slightly larger diameter to fit tighter. Accordingly, I've subtracted one star, to give it 4.

This is a great adapter for attaching common Horsehair brush heads to the Bissell Power Groom canister vacuum.We got a great deal on our Bissell power groom but we’re upset to find that it didn’t have a basic floor brush for our hardwood floors, and that the Amazon recommended brushes didn’t fit once we bought them. This fixed the problem!Pros:- Simple and Easy to attach to both vacuum and brush attachmentPro & Con (your preference)- It’s a very tight fit on the vacuum wand itself. For us, this is convenient because we don’t want to take it off. However, if you wanted to switch to different attachments (that don’t require the adapter) the right fit could be an issue.

I was able to modify it to use as an adapter by cutting it and resizing the OD with electrical tape. It now fits as a good adapter for my mini shopvac and Makita mitre saw. The adapter sizes should have fit, but the tolerances were clearly not designed for shopvac nominal hose sizes.

While my Shark came with multiple attachments, I found one from another source that I liked. Sadly it didn't fit the hose head on my Shark. Voila! Found this little baby, which "makes it fit just right". Simple and cost effective solution for when you are trying to use other cleaning heads than those which came with your vacuum cleaner.Granted, not all are the same, and we know that measuring an inside diameter is challenging (metric is extra tricky for most measuring tapes in the US), but there was the multi-part adapter on Amazon that I knew would be my next solution. Fortunately, did not have to go to that extreme.Consider this little gem if you are looking at another cleaning head for your vacuum.

Those of you looking for an adapter for the shark handheld vacuum so u can use a set of mini tools this is it!! Yes ladies and gentlemen it works with shark so u dont have to pay the ridiculous price for the name brand 1. No loss of suction, fits like a glove and seems to be pretty sturdy!

Did not fit my new Shark Rotator. It fit the attachment from my old Panasonic vacuum but did not fit the attachment to the Shark. And I measured it before I ordered. A waste of money.