Topec 25Pcs-Double Head Screw Extractor Set, Newest Version 3/8” Drive 2-in-1 Functional Easy Out Bolt Extractor Set, Premium CR-MO Steel Rounded Bolt Remover

Successfully removed two snapped locking wheel bolts from a Proace Verso (Peugeot/Citroen style locking bolts). Used the 3/8" with a hole drilled in each using a 10mm cobalt drill bit. The locking bolts had been over torqued and with the cold weather it looks like the tapered part had seized solid. Heated the head of the bolt with hot air gun at 500c for 5 mins each. Also used a torque wrench to remove so I could avoid snapping the extractor. The front wheel required 130nm of torque to remove (tightening spec for these is 100nm). I used a 16mm deep socket (not a 3/8" in square drive) as this gives a stronger interface around the extractor. If you are methodical and take your time and don't rush, these are extremely durable and will get you out of a fix. People who have left bad reviews seem to have issue with the smaller (weaker) extractors in the set - just needs some common sense and research to get excellent results. Saved me £80 in getting a specialist to do the job at least.

Good. Up to expectation.

This set has saved me on 3 seperate occasion during the teardown and rebuild of my Yamaha YBR engine. Very effective provided you drill deep enough into the bolt. Great quality and size variety.

Product appears of quality, job was completed with the removal pins provided. Now if it was only MADE IN AMERICA...it would get a 5th STAR.

Used to remove part of locking wheel nut broken on wheel stud. Did the job, not sure how good the removers are, time will tell if i have to use them again. Thread not very course and i suspect it will wear away quickly. For now though did the job!