SUISFLXGRO Exhaust Flex Pipe Universal Type 100% Stainless Steel For Heavy Duty and Cars (1 PC, 2.25X8X12)

This 12" flex pipe is very good quality - thick metal easy to weld. I had to modify to fit one side of the 2012 Fiat 500 POP pipe as it was a thinner diameter than the other side. I cut 1" off both sides of the new flex pipe for proper length and used one of the cutouts to incorporate as a sleeve to gap the thinner pipe into the new flex pipe. Be careful welding the original Fiat exhaust pipes and they use thinner metal and you can easily burn a hole through it. I'm learning to weld through You tube vids and if I can do it so can you.

Measured correctly and seems of good quality. Welded up and fixed my exhaust.

Worked great! I was expecting the ends to be mild steel, but I'm 90% sure it was completely stainless. It was very difficult to expand for a slip fit, whereas my mild steel section expanded very easily. It also welded with 312 rod and fused to my stainless flange with no burn through and easily. I coated the ends with ceramic exhaust paint just to be safe.

Did the job and seem good quality only time will tell

Purchased to replace the blowout one on my wife’s Highlander. Works as good as the original one. Good price for what you get. Like some of the other reviews said, I don’t believe the pipe part is stainless but that didn’t bother me. I just didn’t want it to rot out quickly. Car is still quiet after about 6 months no leaks at all from the flex pipe. Just needed to be welded on and the original pipe to be expanded slightly as it was about 2.4 inches. So if you don’t have means of welding, you’ll have to take your vehicle to a shop to have it put on if you want it to last. Overall satisfied with purchase. My welds aren’t great but they work.

Good flex pipe, no complaints.

Great bang for the buck .

Not as depicted in cross-section picture. Picture shows it has a flexible corrugated metal tube inside the mesh, which would make this connection very quiet. Instead, a lot of air comes through the mesh and it isn't much quieter than the original one I replaced, which had a hole in it. Does appear to be decent quality and will probably last. Just not all I hoped for.

Great fit

Great quality real SS. Sealed up good with no leaks/noises. Will update after a yr to see how it last with everyday use

Easy to weld in, solved my check engine light and exhaust leak on a mini

I bought two of these from two of my cars they fit perfectly. The cars 2008 Audi A3.

ID of 2" was spot on and seems to be great quality. Other reviews said you can see sunlight through the mesh. I did see some reflection come through the mesh but I can confirm it is airtight. Blocked one end and tried to blow through it and no air escapes. Installed and worked great. Not sure about longevity of course. Fyi, I clamped mine in but the best way is to weld it in place (in my case it was used to fix an infrequently driven old car).