Description: 1kg high quality PLA-filament white 1.75mm on round bobine This PLA-filament of the German company HERZ was produced on speacial Extruder lines in the HERZ proper branch in Hungary. During the production it was controlled by a laser measuring device and in laboratory afterwards, to check the quality requirements. The filament is suitable for a variety of 3D-printers and consists of high quality raw materials without adding regrind. A uniform filament supply and consistent print quality is guaranteed through compliance with the low selected diameter tolerance limits (maximum of 0.05mm for 1.75 filaments). It, s not surprising that PLA filament is a very popular media, it has a long list of positive qualities and is biodegradable under the right conditions. It is much easier to process than ABS-filaments and therefore ideal for beginners. The perfect print temperature is depends strongly of the 3D-printer, we recommend a processing temperature of 190 °C to 225 °C. A heated printing bed is advantageous but not required. However, the optimum adhesion of the first print layer is crucial for the perfect printing result! Details: High-quality printing media​ No regrind Made in Europe Material: Poly-Lactic Acid (PLA) Polylactic acid density: 1,24 [g/ccm] Diameter: 1,75 [mm] diameter tolerance: +/- 0,05 [mm] Rounding tolerance (max.): +/- 5 [%] Heat resistance: 66 psi (0,45 MPa) (ASTM E2092) 55 [°C] Processing temperature: ~ 190 - 225 [°C] Heated bed temperature (if available) ~ 50 - 70 [°C] Tensile Modulus: (ASTM D882) 480 [kpsi] Tensile strenght: (ASTM D882) 16 [kpsi] Tensile elongation: (ASTM D882) 100 [%] RoHS compliant Bobbin size: 200 x 65 [mm] Net weight: 1000 [g] Length per kg: ca. 330 [m] Bobbin diameter: 52 [mm] Scope of Delivery: 1kg filament on round bobbin
Trustpilot
3 weeks ago
3 weeks ago
