Joosenhouse Hard Wired Picture Light Gold Modern Picture Lights for Paintings 300 Lumens Brightness Adjustable Swing Arm Wall Lamp Dimmable Accent Lighting 110V AC

Well-built, good looking, LED wall sconce lamp. I like the fact that the color temperature is warm, similar to incandescent lighting, perfect for a living room, and yes it is dimmable using the wall-mounted dimmer I already had installed, with no flicker at all. Exactly what I was looking for and at a very reasonable price. Note that this lamp is designed to mount to a common circular lighting junction box installed in your wall with the included plate that screws to the box and has threaded tabs left and right to which the lamp is attached with 2 screws. Simple, functional, and looks nice.

Used on bookshelves. Wanted to liven the old things up. Worked!These lights are EXACTLY what I was looking for. They cast a warm white light (NOT the cold blue white leds). Stainless housing and design look quite modern and solid. The articulating joints hold well - was worried about that. As you can see in my pic, I mounted the lights to the roof of the bookshelf and the arms are at 90° and horizontal.Note they do not come wired - you need to provide that. I wired mine to an Alexa-capable dimmer so that I can control them by voice. "Alexa - bookshelf lights 25%". Boom.

Let’s start with the good. The value is awesome. The metal and finish are excellent and so is the design of it. It looks really slick on the wall. I ended up wiring the light to a WiFi switch that is in one of those recessed TV receptacle boxes behind the picture. The WiFi switch lets me control from my phone but also lets me set a schedule for it to turn on and off. It also has a dimmer function.Now some of the bad. The 3000k temperature sucks. It truly is a soft white. I ended up calculating the gel filter tone I would need to bump this down to warm white (LEE Filters 809 Zircon Warm Amber 8 Filter ). That made a tremendous difference.Even on the lowest dim it’s still a little too bright for me. I’m living with that for the moment but may consider layering another filter over it. Btw the end caps just pop off. That’s how I put the gel filter in. Easy peasy.The third bad and most important is the hinge. While the instructions say to tighten the screw if the hinge doesn’t hold, there is no way to get it tight enough to keep it from moving. Using a stronger device than a hand screwdriver like a screw gun just strips the screw head. I’m still trying to figure out how I can keep it tight.

My electrician said it was super easy to install and I think it’s stunningly beautiful, it’s exactly as pictured. I would say the only negative was while installing it we had to loosen and tighten the little set screws on each side because tightening them all the way pulled the sides of the metal in so that you could see the hole in the drywall that was created for the electrical part that’s behind the box, and all of it was cut and made and done exactly and minimally to what was necessary to put up the light. In the end we got it as close as we could and I just touched up a little bit of the gray paint since there was a tiny little white showing of the drywall and bah bam! Gorgeous Dimming picture light that I’ve always wanted. I would definitely say it was worth it!

I had an idea to plaster my bare wall with these, and was pleased when I got them, seeing they were solid, and not cheap or plasticy looking like I’d feared. Being LED’s, one switch could handle these with no problems. Can’t speak to the dimming ability as it’s currently on an on-off switch, but I will swap that out soon. If there is one minor gripe, you can see the rim of the junction box sticking out just a fraction on all of them if you’re looking for it. With the light and photos to distract the eyes, nobody has caught on though

This light is beautiful to look at but very, very poorly designed in one feature. the arm which goes from the base to the light bar is moveable so that you can adjust the angle of the light bar. however there is an instruction to tighten the screw if the light bar does not stay where you put it. I screwed the screw as tight as i could possibly get it, and the light bar is so heavy that it will not stay in the position in which you put it. It swivels completely downward rending the entire unit unusable. I contacted Amazon to get the contact at JOOSENHOUSE (manufacturer) to help me with this problem. the phone number Amazon gave me is a non-working number. The on phone call #2 to Amazon, the rep advised me to email them them from Amazon's order page. I did, and was told "since you bought this item at Amazon, they will handle customer complaints. I returned it and no will not purchase JOOSENHOUSE products.

High quality product for the price. Bought these to install for a client and they thought it was from a higher end company. Very happy with this purchase.

The light housing is pretty, sturdy and seems well made. Unfortunately, the LED lights inside are different hues. It’s hard to tell in the photos but in person it’s pretty obvious; the one on the right is a cooler tone, the one left is a warmer tone.

Me gustó mucho y luce muy bonita en mí escalera

I rarely write reviews, however this light is impressive. A soft brushed brass metal picture light that is dimmable and 3000k soft white. Highly recommend.

I installed it over a 6' x 6' abstract so wish I had gotten a bit larger. The canvas covers an outlet so I hard wired a plug and control the light with the app - perfect.

Instillation was easy and the range of lighting is perfect. It covers a piece six feet long. Definitely recommended!

Like it not to big and gaudy. It is discreet