ionzPC Gaming White Case Mid Tower ATX, E-ATX - KZ-V Light Aether Series Tempered Glass 0.8MM SPCC - Maximum Access to Components - Includes 2 x 140mm and 1 x 120mm ARGB Fans - 10 Port Fan Controller

This case is one of the best cases I have ever built a PC in and I have built a lot of them. Client asked for a white Case and white aesthetic, this fits the bill perfectly.The 2 140mm fans and the 120mm exhaust move a serious amount of air. The filters on the front and top are top drawer. There is also 3 removable panels inside the case to assist with cable management including 2 GPU mount supports for those larger cards.I didn't need it so I removed it and behind it looks clean all the way round.There's a drop down flap for ease of mounting the PSU and keeping the cables tidy out the way, 2 dedicated mounts for SSD or HDD with an additional 2 SSD mounts meaning you can have some serious storage.The top will support a rad if you're going for an AIO cooling solution or given the size of the inside of the case and the airflow, air cooling will be very effective in pretty much any build.Both sides of the case have hinged glass, well built doors to allow ease of access and if you're looking for them, the RGB remote, cable ties and screws can be found in the SSD bays to the front of the case... took me a second to find those, at least they're secure.Overall I give this case a 9.5 out of 10. The only small quibble I have is the fact the right side panel is clear meaning you have less scope for tardy cable management. Then again they do place cable ties in the bag so there's no excuses there.Buy this case. You won't regret it!

For the price you get so much room and access to components and high quality materials, with 2 tempered glass panels. Included standoffs, cable plate and GPU anti sag brackets are also a nice touch. The 2 bottom panels allow easy access to SSD's and HDD's and is something more expensive cases lack. Dust filters work very well and the case has a very premium feel for half the price of other cases.The case can also be converted to allow vertical mounted GPU's with no need to buy anything and is also compatible with the Cooler Master Vertical mount kit as seen in my picture.Only issue I've faced was that the HDD cage lacks adequate vibration dampening so vibrations can be heard from spinning HDD's, but it may alps be that my HDD is just dying. 10/10 budget case with premium feel and features

Exceptionally well-built with a solid feel, the design allows quick access via doors rather than removing panels. Thoughtful details like velcro straps for cable management and rubber surrounds for cables are a nice touch. The fans not only look great but are also quiet and compatible with Dragon Centre, SignalRGB, etc. The only drawback is that the fans are DC rather than PWM.

For the money it's a great case, plenty of room to work in, cables are easy enough to manage and the only negative I can think of is the rear cable management door only has 1 screw in the middle, really needed a screw at the top and bottom to stop the door bulging out from the cables behind.

Excellent quality and well designed case at a budget price. Nothing not to like here.

I purchased a case with 3 ARGB fans and controller. I got the case. No fans. no controller. I didn't even realize it at first, I thought they were still in the box, assembled my PC, looked in the box to add the fans... nothing. That was bad enough. I have a pretty slimly wired system. 3 wires for motherboard power, 1 wire for the GPU. With just those and nothing else (No, I don't have a single hard drive, CD, or any other power wire!), the cable run on the right side is so overfull the case won't close, and it closes with magnets. Push the bottom closed, POP. Push the door closed, POP. just swings open again. I wouldn't recommend this at all.

Wanted a case for an ATX board was sick of trying to shoehorn things into an mATX. Got this case the KZ-V Black Aether Mesh (without the flashing lights or fans) as it seemed to be good for the price.It's not good - IT'S FANTASTIC!. Build quality is astonishingly good , It's been designed by someone who has actually built PCs and the detachable doors and opening panels plus the movable disk tray means you can easily get cables where you want them.If you want a good quality, well designed case that has plenty of room and more importantly the ability to tailor that room to your needs this is the one for you

A nice case, it's close, like any case.Using an ATX board, slight difficulty connecting to the bottom of the board an extra 6-10 mm would help.Cable management is fine unless like me you motherboard top power cable has to go up the back of the case, so I used pliers to bend the bottom edge of the cable cover to allow cable to pass un pinched.The panel to the right of the motherboard, I used extra standoffs to give an extra 6 mm of clearance, for pass through cables, 24 pin and sata cablesBasement yes it works for two HDD's. But a trick was missed here. Some people still use a disc player, and this can be fitted here easily with correct bracket.I personally have added two usb 3 ports. Makes life easy as my case is on my desk.I would have liked a twin 5 1/4 inch bay, more options.The glass panels, I cannot see a reasom why the rear panel is glass a metal panel would have been fine.The front panel, corners are not very well protected. A frame around glass is better.An option to have perspex pannels in a frame would have been nice. Not everyone likes glass