🚗 Light Up Your Ride with Style!
The DUOFU365 Exterior Car LED Hood Light Strip is a 59-inch RGB multicolor dynamic lighting solution designed for cars, trucks, and SUVs. With an IP68 waterproof rating, it ensures durability in all weather conditions. Control the lights via a mobile app or remote, offering 210 modes and 16 million color options. Easy to install with heavy-duty nano tape, this versatile strip enhances both safety and aesthetics, making your vehicle stand out on the road.
Brand | DUOFU365 |
Color | RGB Multicolor |
Form Factor | Strip |
Auto Part Position | Rear, Front |
Included Components | 1* RGB car hood led strip+1*Remote control+1* Test pencil+1* Hot melt glue stick +1* User Manual |
Special Feature | with heavy duty Nano Tape on both sides, 210 modes and 16 million colors, Soft & Bright Light, Rust Proof, IP68 Waterproof |
Material | Silicone |
Water Resistance Level | Waterproof |
Remote Control Included? | Yes |
Number of Pieces | 1 |
Manufacturer | DUOFU365 |
Item Weight | 8.8 ounces |
Package Dimensions | 9.09 x 5.04 x 1.14 inches |
Batteries | 1 AAA batteries required. (included) |
Manufacturer Part Number | DFUS-SL0084-RGB1.5M-FBA |
Special Features | with heavy duty Nano Tape on both sides, 210 modes and 16 million colors, Soft & Bright Light, Rust Proof, IP68 Waterproof |
Wattage | 8 watts |
M**E
Works great
The media could not be loaded. I know some people have complained about the quality but my experience is that is made very well. Easy to hook up as well. The only thing is that the wires for left and right turn signal are in the directions as if they’re look at the vehicle. Not sitting inside it. This got me mixed up when I first connected them.
J**R
Had to return another! THIS ONE IS IT! 2024 Equinox RS
Straight out of the box it only took 30 minutes and these look great! I haven’t even played around with the remote or app yet. Here’s to hoping they will last some years! Cheers! 🍻
A**R
They don't work very long. 1 month at best.
I bought 2 sets of these. Professionally I stalled. The first set stopped working after one month. Put the other set In. Lights burnt out on them within 2 weeks.
J**L
Good for the price. My tester did not work.
It would have been nice if the tester worked but it did not. I had to manually find the constant and see if the power and blinker leads work. The adhesive is nice and strong and look is great. I do like the option of cutting at the marks and then you can easily adjust the center so that the LEDs can align properly. My issue was that I could not find good power source to tap into on my fuse box. Every fuse I tried kept the LED on until I tapped my blinker and used that power source. So that when I turn on at least my parking lights, the led strip will turn on, but the blinker will work even when off. I prefer it this way. Another good thing is that the unit has a dimmer feature built in so that if you can dim it to you preference. I do like you can shorten the blinker setting so that not the entire half of the hood is blinking, rather just the section you want. I measured it to about the lenght of my headlights. No resistor needed here either. No hyper flashing. Pretty simple install on my 2003 F150. Yellow is the drivers side and blue is the passenger side.To install properly, check to see if you need to cut it. I have a 70 inch and I could have cut about an inch or Two to install but I kept it entirely and tucked it under the fender sides of the hood. I did have to put electrical tape to mask the red 3m tape on top so that you do not see it peeking out from the hood. As for the wiring, the only issue is the blue wire lead from the passenger side. It is long enough lead but there is no way to tuck it anywhere other than the cowel. Just keep that in mind.The kit comes with pretty everything you need, but I would highly suggest wire taps to tap into the power (red) side of things, just because of what I encountered. I then zip tied the control module to the side of the firewall next to the drivers side fender. That way, I can easily acesss the control box and also tuck away any excess yellow and red wiring. The ground was just tapped to the car's hood and no tapping needed on that one.Once you do peel off the sticker and align your middle, I suggest do a test fit on the ends so that your strip will fit. Also it's a good idea to close the hood and see where the LED strip lands so that you can plan accordingly if you need to mask the top like I did. I do recommend this one and is like the other one you see. So it is pretty much the same unit. I just wished the tester would have worked. It would have helped to test out the leads.
E**
Looks good
So far so good
B**B
Looks good, didn't last long
Looks great once installed. No marks for cutting down to size. Ended up tucking the excess into the front fender. Didn't survive the first trip to the carwash (all wiring was heat-shrinked and water protected. Might buy another to see if it will last longer, hopefully it will last longer.
P**A
Looks great!
Made my truck look awesome and unique
R**.
seems to be a malfunction.
Easy to install, but after a few days, the kit has a problem. i had to cut the car off and restart so it would stop acting up. will request another kit for replacement
L**D
It was used as much as 5 times
Pros.They looks nice and work excellent nice blue ice color and the amber just work amazing . The first day working fenomenal .Cons. After a month with only 4 uses has been burned in the board and not working anymore , stay away of this product.They are a bit shortmissing a mini fuse adapter , they include only medium and big fuse adapter that are used in old cars models.
J**R
Test pen not working so not able to install it
R**D
Love it
Item is as advertised and gives my pickup a very cool look, so many light combinations to choose from its unreal, very happy with this purchase
G**S
Item didn’t work as advertised
Item didn’t work as advertised and now scared to purchase again for fear of same result
ナ**ト
いい感じ
なかなか良いでさよ。
Trustpilot
1 month ago
1 day ago