VEVOR Truck Bed Storage Box, Lockable Lid, Waterproof ABS Wheel Well Tool Box 6.6 Gal/20 L with Password Padlock, Compatible with 2015-2021 Ford F150, Passenger Side, Black

east to install and use

Installation was not difficult. Had to purchase 3 bolts. Screws furnished would not work.

As many of the comments mention, the proper screws and nuts are not included. The kit does come with self drilling screws, but my 2018 F150 already had factory holes. You would need to buy three bolts/nuts/washer in order to uses these holes. I would not recommend drilling holes, but that's your choice.Also, the holes for the locking bracket do not line up. You might be able to use a vice to bend the bracket to line up the holes. I do not own a vice.I also had to remove and flip my tie down bracket or the storage box would not close correctly.The instructions are not great, but I have seen worse. At least there are pictures.Overall, this took me over 1 hour to install.As for the quality..... it's cheap plastic. I think it will serve my needs well, as I plan to put some basic tools (tier iron, jumper cables, ratchets straps,etc). But I could see if a pro was to use it, it probably would not last long.Would I buy it again? Probably not. I got it because it was cheaper than the others, I got what I paid for. I should have spent the extra money for a better one.

The media could not be loaded. Is not compatible with hardware provided for a 2022 Ford F-150 XLT. Have to run to the hardware store and purchase bolts and washers to make doable. Spending an additional $10 in hardware. Install instructions are not that great either. Buyer beware.

Nice toolbox

I bought the VEVOR Truck Bed Storage Box for the passenger side. I believe it would block the factory LED lights on the driver side.The box is well made and easy to install. You will have to remove a few pieces from the bed, install the box, and reattach everything. The instructions are clear and easy to follow.I enjoy having a secure out of the way spot for a few tools, oil, and chainsaw items.I will mount a self-contained motion light in the box for some light on the dark nights.

So yes, go buy 3 m8 2 inch hex head bolts, thick waters and lock nuts. Take out the taillight, bolt in the hinge bracket but keep it a little loose. Next, test fit the latch bracket. If it's too wide put it in a crack in the sidewalk and step on it. Do this till its the right size. Flip the nut n bolt on the latch catch so the Phillips Is on the ouside. Bolt the latch bracket in place. Flip the tie down point by the twilight tround. Attach the box, test fit the latch and adjust by moving the latch up or down and or adjusting the hinge bracket by putting the box parallel to the bed and move the end up or down till it latches. Tighten up the hinge plate. Tighten up the latch by putting a open ended wrench behind the bracket and turn using the Phillips. Load it up and go. Took me 30 minutes and I was done4 stars cuz the plastic is a little brittle.

Added to my 2022 super duty without issue. Pretty durable and good for tools and bottles of liquids I don't want rolling around my truck. Ordered for my passengers side as I believed that if I ordered the drivers side it would cover my button for the bed LED lighting.