UTG1PC Offset Airgun Mount with Stop Pin, 1" Dia, Bidirection

I purchased this for a Hatsan 155 torpedo and it works great . It gives me excellent eye relief and also comes with stop pins and even extra hardware. They are high profile mounts which accommodates a 6-24 ×50 scope nicely. I really like this and purchased 3 more for some of my other rifles. EXCELLENT PRODUCT(I found other mounts for cheaper prices but why risk buying junk when you have a proven product) just purchased another for a Hatsan150 sniper.( The last mount I received seemed a little off and had to shim rear mounts in order to get my scope to zero out,but no big deal. ) late entry I purchased 7 total and last 2 needed to be shimed so I think QUALITY CONTROL is needed. Also make sure you secure the bottom mounts before screwing down your set screw. Otherwise your alignment will be thrown off and your scope will have to be dialed to far left or right and if that happens you know the mount is fighting against the set screw.

I recently upgraded the optics on two of my airguns with UTG Swat scopes. Both guns being break barrels, I also invested in UTG dove tail to Weaver droop compensator mounts. The droop compensators raise the height of the scopes to a point where I had to get more of a "jaw weld" than a cheek weld on the comb of the rifles, using the medium rings that came with the scopes. I ordered these rings, and they did help quite a bit, though I'm still not getting the true cheek weld I had hoped for. The rings are solid and have a positive lock on both the mount and my scopes. They have the "fabric tape" in them that many rings have, and overall do the job famously. Overall, I am very happy with these rings.

I used this to mount a UTG Bug Buster scope on my Benjamin Marauder pistol air gun and it fit perfectly. Good quality, no machining marks or blemishes and nice finish. It is light weight and for the price, cant be beat.

Impressive construction and quality.

They didn't work for me. I mounted them on a Ruger 10/22 Takedown and I wanted to still use and see the stock sights but I could not see them through the holes. This mount was also way too high and I decided not to live with them and get the low mounts because since I was shooting a .22LR at close range I will probably have problems with parallax and I was actually lifting my head off the comb of the stock. I decided to get the low profile version of these and they work great for my application. The screw mounts and quick, tight, and secure. They make a six screw clamp if you need a really heavy duty clamp on your optic. Happy shooting. Cheers. UPDATE 3/5/13 Just a Note on my particular application on a Ruger 10/22 TAKEDOWN. I got the rifle because It can be taken apart and get smaller and is great for travel,hiking, and camping However, with a scope on Rifle (Nikon with .22LR BDC) the rifle Does NOT fit in supplied bag anymore. I have three options of which I don't like. 1)get a smaller scope that I do not need to remove to fit in bag but I like the scope) 2) Get a different bag that is bigger (but I the stock bag) 3) take the scope off everytime which is easy enough and there is plenty of room it the bag but the scope is off zero ever so slightly every time I mount and dismount (It makes this fairly accurate rifle a little less accurate and a chore to shoot. I'll let you know what I decide. For now rifle has been staying in one piece and going in a full size case. Not very practical for a TakeDown.Hope this helps. Good luck.

This is a great, inexpensive off set mount for your air gun or rimfire rifle. I have one on my Hatsan 95 Vortex .25 and it hasn’t budged after hundreds of rounds. It allowed proper eye relief and scope setup. Something to note, I could not get the UTG Bugbuster 3-12x32 to work in this mount. The bottom of the windage and elevation adjustment housing sits flat on the bottom of this mount. This is not ideal, as the mount clamps to the dovetail from one side, and by the nature of that design, it is *slightly* off center causing the crosshairs of the scope to not be level when the gun is level. So as long as the scope you’re mounting with this has room to rotate, allowing you to correctly align your crosshairs, you should be fine.

I got a better scope for my Gamo Magnum, and I wanted to use the Gamo 1-9 X40 AO on my Swarm Fusion as it is a much better scope than the Gamo scope supplied with my Fusion. However, it was a no-go with the standard Fusion mounting because the Magnum scope was too big for the Fusion. This UTG 1PC Offset Airgun Mount w/Stop Pin, 1" Dia, Bi-direction fits perfectly on the RRR Recoil Reduction Rail but offsets it from the Gamo Swarm Fusion10X Gen 2, so that there is no incompatibility with the scope and the Gamo Swarm Fusion 10X Gen 2, .22 Cal mechanism. In fact, it is a little higher and further back so that it is much easier to sight in and because it is a little higher and further back the reloading mechanism interferes less with the optics and makes a much clearer picture through the scope. In addition, this mount is an aircraft aluminum alloy. It is light and very rigid. This is perfect for a rock-solid mounting. I am not sure what alloy of aircraft aluminum they used. But typically, it is very strong. For instance, Aluminum Alloy 7075, which has zinc as the primary alloying element. Its strength is with strength comparable to many steels but much lighter. This mounting is therefore, very light and strong. It does not make the rifle feel top-heavy. UTG hit this one out of the park with design, strength, and functionality.

I bought a new scope and decided to give the UTG rings a try since the reviews were so good and they cost WAY less than what I normally buy. I made a huge mistake though. I bought a couple scopes. One scope was a 40mm and one is a 50. The "medium UTG rings and the 50mm Sig scope are not a good match. The scope rests right on the rail. I know better I just didn't think about it when I ordered. So I bought the high scope and it clears just fine now. The mount secures tight to the rail and grips my scope like a child to his favorite toy The Good: 1. The Price 2. Build quality seems good 3. THey tighten up very well to the rail 4. They tighten very well to the scope 5. They adjust quickly Conclusion" Im really pleased with the rings and very much recommend them