Motorcycle sizing chart: 1oz for 80-120 mm width tires, 2oz for 130-230 mm width tires, 3oz for 240-360 mm width tires. Wheel weights are now obsolete. Now there is a better solution for motorcycles, ATV's, autos, trucks, commercial vehicles, and trailers. Internal balancing beads optimize tire mileage by continuously balancing your tires as you drive/ride. This is an internal bead dynamic balancing method, a high-density ceramic bead that is easily installed either by adding during the tire mounting process or using the valve stem application method. The beads will distribute themselves in weight and position based on the balance requirements of a particular tire. This gives you a smooth, vibration-free ride, while improving tire life by re-positioning as the tire wears. For virtually any vehicle, ceramic beads are the best way to get rid of vibration and tire cupping problems.
| Manufacturer | CURECURE |
| Brand | DYNA BEADS |
| Model | DBS-2+2KIT |
| Item Weight | 5.6 ounces |
| Package Dimensions | 5 x 4 x 2.1 inches |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | DBS-2+2KIT |
B**E
Once installed, take the bike up to 100+MPH very slowely to see the effect.
Love them! I have changed both front and rear tires on three different model bikes (R-1150 RT, K1200GT & Yamaha Super Tenere) and gone through 6 pairs of tires. Used the Dyna Beads in all of them. Right after changing, I will go to a light traffic highway, and slowly bring the bike up to 100+ MPH, then slowly back down to the legal road speeds, to search for any resonances.None found! Tire wear has been even in all these cases.(F.Y.I. I use almost exclusively the Michelin Pilot Road tires on my bikes.)
T**I
I had a local shop install the tires (too expensive) ...
I had a local shop install the tires (too expensive) and told them to leave them unbalanced. Drove the bike home and found their taped weights all over. That said, there was a vibration that I expected at highway speeds, but I would have been irate if I was not putting the beads in. I put them in with the weights and took it out for a spin, came back, took the weights off and did the same. I then road the bike, now smooth as glass, back to the shop and gave them back their weights. I put this in all my bikes!
S**T
Was Skeptical but Now Conviinced
On my HD Electra-glide, I could not get weights to adequately adhere, so I gave these a try. I was able to deflate the tire, remove the valve-stem on my 90-degree stems and have the beads easily find their way down. I jacked the bike up to partially re-inflate the tire before re-installing the valve-stem guts. The bike has never ridden so smoothly. I will probably install on my dirt bike when I convert to Tube-bliss.
L**D
Kinda pricey, but effective.
Have put about 1600 miles on the bike since installing Dyna Beads in a new rear tire. Dyna Beads appear to be an effective method of balancing the tire/wheel, and have caused no problems so far. I am not sure why they cost as much as they do, as there is very little to them. I guess its not a matter of what they cost, but how much are you willing to pay...
S**S
The beads are awesome
It takes a little time to get the beads into the tires so be patient. Fill the tube only half way with the beads. I found it easiest to tap the valve core with the handle of a screwdriver to get the beads inside. They work great!!! It feels like your tire is really gripping the road, especially in curves! I won’t go without them in my tires again!!!Be sure to remove all wheel weights before riding.
A**R
Easy, frustration free
First time using this brand and will definitely purchase more. Favorite part is these didn't get clogged in the valve stem like I've experienced with other brands. Maybe I just got lucky, but install in the tube was extremely easy and quick. Probably took longer to unscrew the valve stem than it did to fill.
S**P
Can be a little tricky to get them in through the valve but other than that they work great. Only drawback is they do not provide any ...
Put these in my motorcycle and so far no complaints. Can be a little tricky to get them in through the valve but other than that they work great. Only drawback is they do not provide any puncture sealing like most of the liquid balancing agents do but on the other hand these are dynamic for the entire time they are in the tire and therefore continuously adjust as the tire ages.
R**H
A NEW way to Balance your TIRES !
Believe it or not , THEY WORK ! I took all the weights off my wheels and put the beads in and tested it at 100mph. No wobble , no shimmy , nothing that out of balance tires do happened . I used them on Mitas E-70 tires that are 50% on , 50% off road , so I can't answer for full road tires . For the riding I do they worked very good .
Trustpilot
1 month ago
1 day ago
