Two-in-One Blue Manual Can Opener for 8-19 Oz Beverage Cans, Bottle Opener, Household Bar Tool

It took us a while to get the hang of using this (especially since we have small hands). A bit hard to squeeze with small hands. Also, it’s much easier to pull the top of the can off if you pull it with this tool. We originally used the tool to cut the top and then used our hands/fingers to pull the lid off. Once we figured it out, it was well worth the purchase. We’ve cut over 50 cans and it’s still cutting just as good as when we cut the first can.

Don’t buy into the hype. This product leaves a sharp edge that will cut you around the top of the can. Spoiler alert- just use your normal everyday kitchen can open, cuts under the lip and will leave a clean edge you can safely drink out of.

Bought this out of curiosity and I still use it but just advise that people are careful. I didn’t cut my lip but could definitely see it happening to somebody else if they were drunk or not careful

This took me over a month to receive for some reason, but it was worth it.This was a great can cutter for removing the lids off of cans for use in a solar-heater project.Combine this tool with a 1-3/4" hole saw and silicone the cans together, paint them black and set them inside of a 3" deep fixture with 1/16" plexiglass on the front and 1/8" backing, with a 120mm hole on the top and bottom to push the air.Also look into an 120mm AC Infinity fan system to complete the project.Would recommend.

This thing works just ok. It doesn't work with open cans and didn't want to try it on an unopened carbonated drink because I assume it might squirt everywhere. I tried it on an unopened drink that wasn't carbonated and it worked fairly decently but left a very sharp edge which made me feel like it's not the best idea.

love this product

Leaves a sharp edge around the whole can. Worked better with my regular can opener. Would not recommend using if you’re looking for something to drink out of.

It works for the purpose I bought it for (removing the top to be recycled separately from the rest of the can). But it could be sharper. Doesn’t cut very smooth, sometimes leaves some sharp or jagged edges. I wouldn’t recommend drinking out of a can after using.