VHT ESP451007 Anodized Blue Color Coat Can - 11 oz.

Very satisfied with this paint, looks great and it's very durable if you follow the curing instructions on the can. Bake at 200 in an oven for an hour. It's supposedly chemical resistant and high temp as well so it would be great for engine bay parts. It works best for the anodized look if the surface underneath is already somewhat shiny, the washers I used in the picture were galvanized.

Love it

I am tempted to give this five stars but just one small issue stops me. I used a silver base coat to get the "pop" I wanted with the color. My brackets were sanded to bare metal and then based with the silver before the coats with this. I know the directions say to let dry for a few mins before additional coats so to be safe I gave it a few hours between coats. After 4 coats over a two day period you can see my results. Very very happy with the outcome. Now for the issue...if the paint is scraped or marred it will come off as if it doesn't bond well (so like a flake). It could be that it did not match well with my base but I think it's worth a try if you got the money. I'd purchase again.

I wanted to paint my wifes 6.2 with her favorite color. I like this purple but it is super thin paint. Almost thinner than water. I used a chrome base paint to make the anodized feature pop a little more. You will have to apply several several……again several thin coats and keep it moving fairly fast from side to side once you start. Being the colder season didn’t help any but I did use my heat gun to help keep the engine warm while painting.

It’s darker then I wanted it but I sprayed it over with no clean a prep brake calipers and it dried good and really didn’t need to much with a second coating. It’s a midnight midnight purple in a can to me

Wish it was the color on the cap. The pink color looks great, but it’s not purple.

The media could not be loaded. 1st of all, I had no idea this stuff would be so much fun lol you Will need a good mask as the fumes, although it smells Very pleasantly of cherries, are a bit... irritating to the lungs and sinuses. Was kinda stuffy and congested for a couple days after use with just a simple dust mask. But I used a soft sanding brush dremel attachment and made some "designs" and then coated with the VHT and was not disappointed. I will definitely be ordering and using again in the future.UPDATE!!! 2 years almost to the month. It's held up very well. Jet boat goes 65mph+, so it's managed to survive for 2 seasons straight up being severly abused by water and sun. It's got some chipping (very minor). One bracket faded. No clearcoat on it. Gonna repaint possibly this year (and use a good UV clear this time) definitely can't complain though!

use the high heat primer and baked on at 220f for 45 mins then used 3 coats of the high heat blue baked on at 220f for 45 mins and then 3 coats of the clear high heat baked in at 220f for 45 minsthink it came out pretty good i messed up the lip on the right then i remembered on the bake of the clear that i forgot the tape on it and grabbed it with a rag and missed that side up here it is in the process plus the before and after photos its the same valve cover wow what a difference

チタンサイレンサーを磨いていたら紫の焼け色が落ちてしまったので使用しました。色が気に入りました。耐久性もありそうです。

Will look good when done ✔️ 👌

鏡面仕上げしてからスプレーするとアルマイトのような感じになる、素材、スプレー缶共温めて置くとムラになりにくい。

1985年アルファロメオスパイダーのリペアに使いました。ベースコートを塗った後、レッドで仕上げました。素人でもこのレベルで仕上げる事が出来満足しています。

以前、amazonで購入し使って便利だったので、今回購入をしようとしたらamazonで取り扱いが無かったので買えませんでした。ネガティブなコメントがありますが、amazonが販売する商品で海外からの輸入品を理解していれば、商品自体は問題ありません。キャンディーカラーのように綺麗に仕上がり満足しています。素人でもこの程度の仕上がりなら比較的簡単にペイントできると思います。amazonで取り扱いして下さい。お願いします。