Alla Lighting7443 7440 LED Turn Signal Lights Bulbs 2600 Lumens 21W CREE Extremely Super Bright Amber Yellow 7441 W21W 7440NA 7444NA

I installed these several days ago and they are fantastic. No load resistor needed on a 2018 4Runner Limited. Quality seems great, so I hope that they last. Installation was a breeze.Rather than the normal twist to lock the bulb assembly in, these come with a soft silicone type rubber grommet and you simply push the bulb into the housing until it is seated. Just make sure that you twist the bulb assembly back and forth a few times to make that that the silicone has inserted all the way in is "seated" into the housing. When it pushes all the way and seats, you can "feel" it grab.The silicone grommet also glows green I noticed. Not sure how this would really apply at night since you wouldn't necessarily have your blinkers own long enough for them to charge up.Great LED blinkers.Cheers

This is very bright. I get no hyper flash at all. The good thing about these is that built in resistors are in the driver , so the bulb doesn't get hot after leaving it on for some time. Other bulbs with built-in resistors usually get hot and they hyper flash after leaving them on for some time.

I installed these lights on my 2019 Tacoma! They look great and they’re really bright! BUT!!! They lasted less than 2 weeks the first time! They sent out replacements and they only lasted a little over 2 weeks!! Waste of my time and money!!

Depending on your vehicle, replacing the incandescent bulbs with LEDs can be counter productive. LED replacement bulbs often don't mimic the shape of the incandescent bulb's filament, which results in a significantly dimmer light, often dimmer than the incandescent bulbs they're supposed to outshine. The Alla Lighting LED does roughly mimic the shape of the original incandescent, although not perfectly. However, it makes up for it through brute force, by just having a really high light output. To be clear, this does work, and this is the only style of LED bulb that I have found that outperforms the original incandescent bulbs in my Honda CR-Z. Even Sylvania LED bulbs, which have worked great in other vehicles, didn't work wellon my CR-Z. Needless to say, these Alla Lighting LEDs work very well and are brighter than incandescent bulbs.They aren't perfect, however. The first issue is their power draw. They only consume 10w when brightly illuminated, and only 5w when dimly illuminated, whereas the original incandescent bulbs consume about 24w when brightly illuminated. Depending on your vehicle, you may or may not get hyper-flashing or a "bulb out" warning on your dashboard. It is also worth noting that these bulbs are advertised at 21w, which they clearly are not. And before you mention it, no you can't add the output of both sides to get 20w, that's not how it works, the 21w claim is a straight up lie.The other issue is common with LED replacement bulbs, and is that between the bright and dim modes, there is very little difference in brightness. If you're using these bulbs as rear turn signals, this is a non-issue. But if you're using them as front signals, or you're using the red version as brake lights, then it is an issue when you have your headlights on. For the red bulbs, drivers behind you will have a hard time telling if you're braking, since to them it will seem like your brake lights are constantly illuminated. THey will have a very hard time distinguishing between the bright brake lights and the dim tail lights because they are nearly the same brightness. The same issue happens in the front with amber signals. Many cars use Normally Amber (NA) parking lights, where the turn signals are dimly lit. When your parking lights or headlights are on, it will look like your front signals are fully lit, and drivers will have a hard time seeing your turn signal since they will barely change brightness when engaged. Be mindful of this when buying these,m or any other LED replacement bulbs.

The media could not be loaded. Awesome so much better than incondesent stock bulbs. 2021 Pacifica has all led except side markers and front blinkers. These do not hyperflash on Chrysler Pacifica 2021 and the 2017-20 is the exact same bulbs and wiring. I did need to electrical tape them since they kept falling out of the OEM plug. I also added side markers same brand.

This product was used for the rear and front turn signals for a 2020 Lexus RX. There was no hyperflash and installation was simple. Backup lamps were also changed to LED (another brand) and the entire process took about one and a half hour, start to finish. The lights are bright and really make a difference.

I have a 2006 Honda crv fits perfect for the front turn signal easy to install ordering another set for the rear turn signal.

the soldering points are not good, after installation, I noticed that one of the headlights didn't turn on, after check the led bulb I did see that the bulb didn't work because one of the soldering points was detached, after soldering the point by myself, the led bulb worked, but the next afternoon I noticed that the light didn't work again, and after extract the led bulb, I did find that the soldering point at the side of the first one that I repaired; was completely detached. I am supposing that was a change in the temperature, but what kind of quality have this to be affected by the temperature.

Top quality.. super bright..The review by ‘That Guy’ was super helpful to me.. although in my case, The bulbs didn’t really ‘held’ inside the hosing, I had to use waterproof silicone to keep the bulbs held and moisture out.I installed it on 2016 civic touring and they work fine.. no resistor is needed.

Really easy installation, literally just plug and done. After installing noticed hyper flash when using them, so had to purchase a set of resistors. Work perfectly with everything and is very bright.