eSUN TPU-95A Rainbow Filament 1.75mm, Flexible Multicolored 3D Printer Filament TPU, 1KG Gradient Changing Multicolor Filament for 3D Printer, Rainbow Multicolor

I was concerned about printing in TPU as I have a Bowden Drive setup. But after a few quick tests, I found it to print superbly, and have no major issues at all.There was a tiny bit of stringing - but I guess that is the down side of using Bowden feed and rubbery elastic material that I am guessing does not retract as well.I printed at 220, with a unheated bed (ultrabase) @ about 40-50mm/sSupports pop off easily, brim you need to trim with scissors or knife. Tidying up the stringing with a knife was quick and easy.

Very good print quality I haven't came across any issue while using this, have been using the same settings as I have for pla

Flexible and worked in my Dremel 3D45. Had a problem feeding at one point, but I suspect its just because the reel is heavy and the filament a bit tightly wound so my machine wasn't able to pull hard enough to turn it.

Although I’ve not had TPU filament before, I found the suggested temperature settings perfect and had a great print first time. I used a temperature of 230C with no heated bed. The colour really pops and is a nice light purple colour like I was hoping. The packaging was great, a vacuum sealed bag with silica gel in a box that included a leaflet with other materials that eSUN sell and their differences, useful for if I was going to get some more filament.

What can I say? One of the best TPU filaments I have ever used.

Only printed on PLA before and didn’t change much on the set up. Ender 3 using Prussia slicer imported TPU setting and done. Whack up the fan speed and increase retractions and nearly spot on.

Great flexibility with this product and strong with thin prints, I did have a little bit of stringing to clean up but otherwise great.

Took a little bit of tweaking to get this to print without stringing but once I dialled in it prints great!Have printed multiple phone cases using this filament with no layer adhesion issues or bed adhesion issues.

Fairly easy to print with, didn't like my textured PEO style beds, but smooth and textured PEI work fine.

Lätt att skriva ut med, mycket flexibelt, passar som stötdämpande, skosulor m m

Vorbemerkung:Ich bin vor kurzem in den 3D-Druck eingestiegen und habe mit dem Ender 3 S1 pro von Anfang an sehr gute Ergebnisse mit PLA+ (von Esun) und PETG (von Extrudr) erzielt.Nun wollte ich mein Glück auch einmal mit dem, wie man liest, ungleich anspruchsvolleren TPU versuchen und habe mich nach ausführlicher Recherche im Internet für das TPU von Esun entschieden - und das war die absolut richtige Entscheidung, denn es hat out of the box nahezu perfekt funktioniert:Das Filament kam bestens vakuumiert und trocken auf einer Kunststoffrolle an. Im Vorfeld hatte ich mich bereits nach dem Studium etlicher Quellen und der Herstellerangaben für untenstehende Druckparameter entschieden, mit denen ich sehr gut gefahren bin. Das obligatorische 3D-Benchy ist gleich auf Anhieb sehr gut gelungen (das ganz minimale Stringing zwischen in den Fenstern ist kaum zu sehen und mMn vernachlässigbar), so dass ich mich im Anschluss umgehend an den eigentlichen Grund der TPU-Bestellung machen konnte - den Ausdruck von Abschlusskappen für Fensterprofile. Kurzum - ich kann dieses TPU wirklich empfehlen.Hier noch die wichtigsten Parameter, mit denen ich auf dem Ender 3 S1 pro Erfolg hatte:Temperatur: 215 °CHeat Bed: 30 °CPrint Speed: 30 mm/sRetraction: 1.6mm @ 40 mm/s

Sono rimasto estremamente soddisfatto di questo filamento eSUN TPU giallo. La qualità di stampa è eccezionale e ha superato le mie aspettative.La prima cosa che colpisce è il colore vibrante del filamento giallo, che conferisce ai miei progetti un aspetto accattivante. La pigmentazione è uniforme e il risultato finale è brillante e vivido, anche se le impostazioni di stampa consigliano una temperatura tra i 210 e 240 gradi, io consiglio di stampare a 200, il filamento viene piu liscio e lucido alla vista.il filamento si attacca al piatto senza nessun tipo di problema una volta trovati i giusti settaggi, ho provato a stampare sia a piatto freddo che a 60 gradi e nessun problema, settate bene la retrazione.Inoltre, il filamento è confezionato in modo professionale, con un involucro sottovuoto che mantiene il materiale al riparo da umidità e polvere.In conclusione, consiglio vivamente il filamento eSUN TPU giallo a tutti gli appassionati di stampa 3D che cercano un materiale affidabile, di alta qualità e versatile. Non vedo l'ora di sperimentare con altri colori della gamma eSUN!

Goede ervaringen met deze PLA+. Snelle levering