10Pcs Amass XT90E-M Battery Connector XT90E Male Plug Gold-Plated Connector with PVC Protective Sleeve Dust Cap for RC Aircraft Drone Accessories

Good quality!

Massive plugs! Works quite well for my solar project, easy to solder, the cap is a tight fit but solidly built. No spark when connected and works well with other plugs.

Amass anti-spark connector for XT-90 work great. When using high power batteries sometimes you get a healthy spark when connecting. These limit that to almost non existent and keep from damaging the connector. These are also the connector required for all of the new I-chargers (456 Duo, 458 Duo, 4512 duo, dx8, dx6)

I have slowly converted all my RC cars over to XT90 plugs as they are a very reliable plug...easy to solder, secure connection, high amperage capable, and no worry of the plugs wearing out. There really is little downside to XT90 plugs other than most batteries are still not coming with them. These plugs work great with other XT90 plugs I own and have not noticed any difference in performance.

These connectors are great quality and can withstand quite a bit of heat. I have these on all my racing class R/C buggies from 1/8 to 1/10 scale and they can take all the abuse I put on them.

Got these for the water proof/dust cover. Almost looks like they will trap and hold water! The cover has a single rubber hinge in the center. That pulls down on the center, so water will set under the flap on ether side.. like a bow?? Wow not sure why they did not test this first? (Put 2 little rubber nipples that fit into the top of the screw heads. That you can push down) <== That would work and keep the sides down and from sliding from side to side!Now The cap go's down into the recess. So they may not leak. But would have made more sense. Just to make sure that both sides were also down.. Hopefully they fix this in the future.. Was very happy to see that they made these!! They will work better, then not having any protection at all.. These will give me protection. Peace of mind, If I have to leave my E-bike battery out side. For a brief period of time in the rain.

Good quality connectors. Definitely no spark, easy to solder, cover caps snap firmly into place. Do exactly what they need to do with out that unsettling giant spark everytime you plug in a big battery. Get yourself some

This parallel connector worked out great for my e-bike. I have two 36v batteries: one 7.5 Ah and the other 15 Ah. with this connect I am now running 36v at 22.5 Ah. No more switching connections on the batteries to the controller if one runs low. I just plug the in this connector and forget about them.

These work great. They are panel mount, and the hole you'll have to cut is very odd shape so expect to do a lot of filing. They're easy to solder and seem high quality.

Yup they works

I bought these for the anti-spark feature connection to my battery.

This is my second purchase of the same.My main reason for getting this is to avoid the sparks when connecting the inverter to the battery.I think you can get up to 100A through this. I only tested until 70A, which it did without getting heated.NOTE: The biggest wire you can connect would be like 8 AWG. So, the current-carrying capacity will be limited by that. Another thing to note is that you may not be able to put the cover if the wire is bigger than 8 AWG. Not a big deal.I would recommend this X90 connector.

Works as expected - great quality product