Car Vent Phone Mount, [Never Blocking Vent, Enjoy The Comfort of The A/C] Hands-Free Universal Extension Clip Air Phone Holder Car Fit for All Phones iPhone Samsung More

This unit attaches firmly and securely to the center console vent of my older Subaru Forester. It also holds the phone securely and it is easy to get the phone in and out of the cradle. The element that slides between the louvers is in the form of a little hook that hooks on the back side of the louver so, once installed, the mount will not fall out unless the louver breaks. You can also easily position the phone to any angle. There is a notch on the bottom of the cradle so you can connect a power cord and still keep the phone in the cradle. The cradle is deep enough to accomodate thin items like a pouch for two or three credit cards stuck to the back of the phone. Thicker things on the phone - like a pop socket - will make it hard to lock the phone into the cradle. I also got an email from the seller offering to resolve any install issues I had. I had no issues but, it was nice to know the seller cared about customer satisfaction and was not just someone pushing shoddy junk made offshore on to an unsuspecting Amazon curstomer base.All that said, I believe ANY vent mounted phone holder will have the following issues:1)Attaching something to the vent louvers will limit the range of motion of the louvers. For my Subaru there is a separate dial that shuts off the air flow from the louvers no matter what position the louvers are in. In other cars the air shut-off feature is connected to the louver motion so, you might be stuck with the vent staying open or staying shut.2)Many louvers are thin and flexible and not really designed to hold a big load. If your louvers look especially delicate this might not be the right unit for you.3)Louvers are flexible so, vent-mounted attachment will never be perfectly rigid. I installed mine away from the middle of the louver and close the place where the louver attaches to the vent housing. This is where the louver flexes the least. The attachment is secure but, if I were doing some real rugged off-roading I'd probably put my phone back in my pocket.

I bought this last year for my 2000 Ford Ranger XLT and it has held up well.At first I installed it in the left center console vent (The one with the thermostat in the pic) It worked for awhile but it bounced a lot, blocked the radio, and recently pulled the vent right out of the dash, phone and all dropping to the floor. Luckily the vent just clipped back in and there was no damage to the phone thanks to the case.Today I decided to try the driver side vent near the door and It seems to work much better in this position. The vent louvers on the side vent are wider apart than the center console vents so installation was much easier and more secure. Installation to the center console was difficult since the hook is wider than the space between the louvers and I was concerned about potentially breaking one of more of them, although that didn't happen.I took a test drive and it stayed in place which is respectable since our local Pennsylvania roads in town are some of the worst in the nation. But it makes a great place to test suspension parts, phone mounts. or anything that might vibrate loose or fall off.As far as handling the phone-My phone is a Samsung Galaxy A 54 5G with a SUPCASE for Samsung Galaxy A54 5G Case with Stand (Unicorn Beetle Pro) case which is basically a rubberized brick. It's big, it's heavy ( the phone and case weight just under 10oz together) but it's great protection for anyone that works under vehicles in dirt, rocks and gravel. It's saved my phone from damage several times now. Unfortunately that extra weight is probably what caused the vent to be pulled out of the console so I'm not faulting the phone mount too much. I just wanted to give a little backstory for other Ford Ranger owners looking for a phone mount for their trucks. Skip the center console, install this mount in the driver side vent, and you should be good to go.To Summarize:The Good-Grabs even thick phones and cases, holds really well.Allows for hands free phone calls or GPS use.Adjustable so it can be used in several different positions.The Bad-Might not mount well in certain vehicles, it just depends on your vents.Ford Ranger owners( older models, I'm not familiar with the newer imposters) will have better use with the driver side vent near the door.That's it so far. If something changes I'll update this review.

Good construction and attached to vent solidly. Works well. The only thing is that I cannot adjust the vent up or down or sideways because if how it attaches to the vent.

It is the first automobile cell phone holder that has worked for me. It easily clips onto my vent (without stopping airflow from the vent). I’m able to tighten the clamps easily to adjust the position and angle of my cell phone. I also like the cutout at the bottom of the cell phone holder. It allows me to easily plug in my cell phones charger without removing it from the holder and charge it during my entire drive.

Holder works well with my large Samsung phone and was easy to install. It has not fallen down once since install. It's nice to be able to move the holder around so easily. The only negative is that it does compromise the amount of airflow from the vent. I also bought one for a family member who is also pleased with it. I would recommend this purchase to everyone for hands free driving.

My girlfriend sort of demanded I get something so I wouldn't be holding my phone while we are on driving trips. I tried this one after reading reviews and looking at options. I'm very satisfied with this product, it installed much more easily than I thought it would, it seems to be held firmly in place and doesn't seem to be breaking or damaging anything. The gripping mechanism with button release works very well, I haven't had it fall out even once and the button release is easy to use. Overall I was concerned there would be issues with a product like this but I have not experienced any issues and find it works very well in my situation and am very glad to have it now. thanks.

If your phone has a pop socket or other grip add on, it makes the phone too big to fit in this. I have a tiny case plus a pop socket and my S24 doesn't fit securely. The vent attachment works well. However once in place, you're not able to adjust the vent.

I've probably been though almost 10 cell holders since I bought my car in 2015 and until now, they all were frustrating and they all broke. This Rorhxia Holder is BY FAR the most incredible unit I've ever used. Solid, easy to use, super functional.

Nice little iPhone holder, great price.

I had a similar unit for my older Samsung phone but when I upgraded my phone to the new S24 Ultra it didn't fit so I needed a new one. This one mounts very securely to the vent and holds the phone tight. This unit has 1 great upgrade in that the release button is on the lower right side making it easy operate with 1 hand. Very happy with it.

I love this thing. I've had it for about 3 months now. It's not the smallest footprint on thr dash but it works perfect for my car becuae the vents are so far and my dash is weirdly shaped that my magnetic holder wouldn't work. I have a ct200h and, it fits well, adjust to how I want it. Nice and close to me, low so its not blocking any of my dash/windshield.Overall amazing.

I have tried so many phone holders that I have a pile of plastic in my trunk. And I have spent more money on other models than this one. All have been a disaster. They don’t hold the phone. It doesn’t stick to the surface. The phone falls out. They don’t attach firmly. A waste of many dollars. Not this one, it is fantastic! Fits into the vent perfectly. Adaptable to where I want it. And so secure! Holds my IPhone14 with the case and it does not let go. Yet the release button is easy to access and open. I am so happy I bought this!!