6.5" Aftermarket Plastic Black Speaker Adapter. Fitted for Toyo ta Avalon, Corolla, Highlander, Prius, RAV, Solara, Tacoma, Venza, Yaris, Crown, Reiz, BYD F3

Worked perfect for 00-05 celica. Easy to install

Fit perfectly on my rear 4runner speakers. A bit overpriced for two pieces of plastic in my opinion but got the job done.

Used these brackets to mount new 6.5” speakers in my 2011 Toyota Corolla. After removing the stock speaker that was riveted in, I used sheet metal screws from Lowes that fit perfectly in the holes left by the rivets. You may need to pull the sides of the bracket to match the holes while screwing it in, but otherwise there were no issues. Install took about an hour - hour 1/2.

Good and fit. It needs some rotation to find the right angle, dont think you bought the wrong size, it is not a perfect equal length triangle

These worked perfectly in the rear doors of my 2005 Tundra double cab that came with the factory JBL system. I put a pair of after market JBL 6.5” two-way speakers in them. It worked out great! One of the holes was slightly off, but this is marketed for many different Toyota vehicle applications. It took no effort at all to drill a hole right where the third screw needed to go. I like it and I will be ordering a set of mounts for the fronts in the near future. I know the fronts are different on my vehicle, but hopefully this company makes them too.

These fit perfect in a Scion xB 2004-2006 front door speakers. All you need to do is drill out rivets, then place these with speakers installed into the hole and line up wounting holes. Be sure to run adapter connector through door paneling before mounting speaker in! There is a small hole just behind the plastic that the wires will run right through. Once you do that, plug it up and mount it. Be aware, the speaker mounting screws do catch on the door frame, just push in on it and make sure the holes are aligned. Next, get some screws and put them in the three mount holes, and you're finished! Tight fit for 6½, but worked smoothly!

Got these for my wife’s 2008 4runner and they fit like a dream. Paired them with the stock harness speaker adapters and everything was installed in less than 30 mins. My only gripe was there was no notch cut out for the adapter wire to fit behind the adapter mounting bracket. I used a drill bit and made one. Maybe a suggestion for future models?

Had to modify a little but it does its job .

Very good quality - brilliant supplier

These worked great once I fixed the issue with the mounting holes not lining up on an 05 Toyota Matrix. It did not matter how many times it was rotated. A quick run through with a drill to lengthen one or two holes did the trick. Mounted them with double sided foam tape to curb any possible rattle and bolted them to the doors. Other than that they worked great. Would recommend if you have tools available to make sure they will bolt on to your application

Alignment on door panel side was perfect however not the same to be said of speaker side. I did use a major brand name of speaker. Nonetheless did make them work

2007 Toyota Yaris 4dr HBProduct fit the front doors perfectly but the holes had to be elongated to fit the back doors. Was able to use these to install 6.5" speakers in the rear instead of 5.25" with no issues.

Fit numéro 1 , prévoir de la viserie quand il faut perser les rivet oem ( ou avoir rivet en main)Toyota Corolla 2015 avec pionner slim