Hilitchi 700Pcs 24-Value Mylar Polyester Film Capacitor Assortment Kit - 0.22NF to 470NF / 100V

Nice assortment of capacitors. There is a lot of them they were packaged very well. I’ve had this in my cart for a long time should’ve pulled the trigger sooner. They all seemed to fall within specified range the 100nf is 102.3 the 220nf is 210.0

Ordered this kit to stock my spare parts bins. I needed one of the values in the kit to repair a board which had some cracked and failed ceramic capacitors. The replacements worked a charm and I put the board back in service. It is nice to have the rest as spare stock for when the occasional repair needs done.I have seen some reviews stating that these caps have no values printed on them. The ones I received do have the standard 3 digit value printed on the capacitor. I have not seen any missing a label. I took some pics showing the print.Additionally, I tested some of the values with my CLR meter to see if they were within tolerance and they looked good. My meter can only detect down to 25pF, which is why I tested a 30pF in parallel with a 10pF so I could verify the 10pF value as well. Of all the caps in the kit I spot tested, I did not find any bad ones.Also, one of the values is duplicated, 100nF and 0.1uF. It is the same capacitor in 2 slots printed in different ranges. Other than that, I do not see any duplicated values. Overall, it seems like a good kit for the money and an easy add-on purchase.

Excellent little kit for "makers" or those doing repairs. I had need of a 220pf cap for a project I was doing, and realized this kit would be even better, since it includes values I may need in the future. I don't have a Z-meter, so I don't know how close they really are, but the 220pf I used for replacement worked just like the one it replaced. Note that these quote a "J" tolerance (+/- 5%) and a 100V WVDC.

It's a case full of capacitors. I measured a few and they seem correct. Inspection number 9 didn't notice that one of the case dividers was missing - see the photos.

I am a hobbyist and it seems like whenever I'd needed a certain value capacitor I didn't have it, so I'd have to order (and pay a high shipping fee for a little thing) and then wait for them to arrive. Now, I'll always have what I need on hand. Great selection.

To design something that could use any of these items, ya gotta know more math than the mechanics of assembly. An hour's worth figgerin' vs a few seconds worth of installation.But this set makes available that final assemblage.

ok

All came well divided and marked. Values were as described too. They are all working great with almost having used every different one at least twice!

Arrived when there were supposed to.Thanks