B145 Carpenters Triple Combo w/Pro-Comfort Back Support Belt. Heavy Duty Work Belt (Medium 31"-35")

After receiving this a few days early I immediately began messing with the configuration of the pouches. The back extra pocket is a lot bigger in person than I expected so bare that in mind. I placed that extra pocket in the center of the back of the belt and just skipped that belt loop and slid the two side pouches as close to the back while remaining in between the the belt loops and I found this worked best for me. By doing that I didn’t have room for the spare hammer holder. But that shouldn’t be a problem. I also found out that the tape holder has two vertical straps on the back of it and the belt loop fits perfectly in between the straps. That way you don’t have to worry about the tape holder falling off anytime you take the belt off. The size and fit of the belt is very accurate. I’m 6’3” 215lb’s and I wear a size 34 so I ordered the medium and the middle holes are perfectly comfortable for me I could even go down the the second hole if the pouch becomes to heavy and still be comfortable. The back support feels really good like you know that the belt is not going anywhere or going to slidding around. Don’t feel like I’ll need the suspenders. Like previous comments stated the pockets hold open themselves and the belt stands when you set it down so you don’t have to worry about your tools falling out all of the time unless you’re careless with it.All in all this seems like a high quality belt that feels like it will withstand the use and abuse of commercial construction.I’ll try to add photos in a few days.

Excellent quality! More rigid and more durable fabric than most of the "big name" ones that cost as much or more, and the back support/padding is wonderful. Being able to get the right size of belt makes all the difference. Most other companies "one size fits most" approach where you fold the pad under and just deal with it makes it much less comfortable. I measured my waist with just a t shirt and was at 32" (I wear my tool belts just above my pant belt) so I went with the medium. Turns out it was barely too big. I emailed the seller and they had an email back in 30 minutes and the small belt shipped the next day. Looking at the size chart, I was worried that the small wouldn't be big enough but they explained the belt would be about 4" shorter. The small that arrived was 3 1/4" shorter and fits perfect. With no extra layers I have one set of belt holes more I could tighten if needed and plenty larger to layer up. If you are in between sizes just email them and they will help out. Having them offer to exchange the belt at no cost if needed really made me comfortable with a large purchase even though I didn't have a retail store close to try them on. The only improvement I would recommend is the Velcro placement on the belt pad/bags. This seems to be a problem with many other manufacturers also. There is a 1 1/2" strip of hook on the pad and a 2" strip of loop on the bags, but they don't line up correctly when the weight of the bags are pulling down. The belt stays centered on the pad due to the loops (which is great...it doesn't sag) but you end up with only 1/2" of connection for the Velcro. If you lift the bag up in the middle of the Velcro, I feel it will start creeping down since the belt is not touching the top of the channel in the bag. Again, most other belt/bag manufacturers seem to also have this so it is not a huge deal, just a recommendation to improve. I will likely just sew another strip of loop on the bags. Overall I am very happy with my purchase and the great customer service.

What can I say, my husband loves it, and I love watching him wear it. I bought it in a size XL. I took measurement and that was the size recommended for his measurements. It wasn’t quite as snug as he would have liked, with the added weight of the tools it would have caused the dreaded ‘plumbers crack’. We live close to where these are made so instead of exchanging through the mail he just drove down and swapped out sizes in person. He didn’t want to let it out of his sight after he got his hands on it, not even for an exchange. He says it’s comfortable to wear, very durable, the pockets on it can be moved around so he can put the tools exactly where he wants to reach for them. The pouches are a good size, he kept saying how the whole belt just really makes sense the way the whole thing is put together and that it’s the best tool belt he’s ever had. Even I was impressed with how well built this belt is.

I just received the belt and wanted to do review on sizing and another review later on the belt as time goes on but far as sizing goes. I wear size 30 pants and there snug on me and don't need a belt. I measured my waist like they say to do and it measured 33.5 just above my waist where I like to wear my tool belt. I got a small after reading reviews and glad I did because the small fits good with 2 set of holes to go tighter and 2 sets of holes to go bigger in winter with extra clothes. So hopefully this will help if your wondering about what size to get. The belt is really comfortable and seems really well but I will say one thing I'm not fan of is the smaller pockets are kinda small and hard to get your hand. The bigger ones are alright and easy to access stuff inside them. This is just my first impressions and will update in couple months of wearing it.