Acteam Ultrasonic Blind Spot Detection System Universal Car Radar Blind Spot Monitoring Sensor System Kit Car Lane Changing Warning BSD Distance Assistant with Reverse Parking System

This system works well and looks like it came from the factory installed. If you pass a car then it will not light up. Won't light up if you pass parked cars or come alongside cars stopped at red lights. It only lights up when a car moves up in your blind spot. Even if you are parked or stopped. It does not light it when cars pass you that are two lanes over(if it does then you did not set the angle correctly with the included guide. It beeps and flashes when a car is in your blind spot and you turn on your blinker. It works exactly the way my factory Lincoln system works. At first, I was skeptical about purchasing this, as not much info or reviews on this product. I took everything out of the box and it was all there. The instructions are not great, but they do the job. All wires are clearly marked and is simple to connect everything together. I initially took it to an Alarm installed then a Car Stereo installer. Both places were puzzled about this item as they had never seen or installed one. They were not sure how to install it. Both wanted to charge me over $275 to install and told me it would take 2 installers 3-5 hours to install this kit. I went home and watched a couple of YouTube videos on the installation of this system (this is the same as the EasyGaurd). I decided to install it on my own. I got everything installed in 3 hours all by myself. I am kind of handy but have little experience with car stereos or car alarms. Once everything is connected it just worked. No adjustments or calibration. There is one wire labeled "Door" which I did not connect as it doesn't do anything. Overall, I am very happy with my system and I definitely recommend this system. For the price, it can't be beat. Add value and safety to your vehicle. I am planning on getting another one for my truck.

Works well. Had it for about a year installed.

(If I could give 0 stars, I would) This system is absolute junk. After installation, the left side has no light but sound, and the right side has light but no sound. Customer support is nonexistent — you’ll be wasting your time and money. It feels like throwing money into the water. Even Amazon’s customer support was no help at all. Total disappointment.

It works great. I only had to do a little modifying to the wires for better installation. The system only picks up when the vehicle behind/next to you is moving faster. If the other vehicle is matching your speed or you are going slightly faster, the system will not detect the other car... at least in my '95 suzuki cappuccino. The sensor picks up cars rolling up to my bumper while I'm stopped as well, a bonus in my book. It does illuminate when reversing, picking up on objects around... and I do mean objects: it detected my bush on the side of the driveway as well as my other car and wife walking up the driveway. I mounted the buzzer behind the driver seat and the illuminated indicators a little high on the A-piller so that they illuminate in my peripheral vision.

Pretty straight forward installation. Needed to remove the bumper cover and some interior panels. Can be a bit daunting at first but everything is pretty much held on by clips. Put it where the factory bsd sensors should be. Wire tapping was tricky maybe include some taps in the kit?. It be nice if it had a diagnostic mode (maybe some diagnostic lights on the cpu/logic Xbox) but in the end very good value. Doesn’t mention what the door sensor should be hooked up to but I put it on my trunk light. Will be testing it out over the next few days but seems to be working well. A great deal for all the tech. It says high quality and it really is. Sensors seem solid and waterproofed. Good water proofing around the cables to the cpu/logic box. Maybe include some rubber sleeves around some of the connectors.

It works great ! I installed it in my old 2008 ford explorer. I was able run most of the wires inside behind the plastic. I went through the trouble of taking apart the door panel and running lights outside on the mirrors rather then have them inside. I recommend getting T-Tap wire connectors for the reverse and turn signal connections also all the wires came with extensions except the Drive detection, I had to get a four pin 24 awg JST male to female extension, though that maybe because I chose to tap the wires close to the bulbs. My only complaint is there is a door detection wire but the instructions don’t explain where to connect it or it’s purpose. Anyway it doesn’t seem to need it.

Nice addition to any car for safety reason. The alarm sound when there is anything on the side of the car moving during turn signal turns on. Otherwise, the light goes on but no alarm sound. For the money, this a good.

NO written directions, NO information on how high to mount sensors, Wires marked good, I am a retired mechanic so I was able to get it in and working, MANY MANY MANY false alarms, but overall it sort of works for a system about 90$, power wire WAY too short, I have it wired so it can be disconnected fast n easy if too many false alarms, if it wasn't such a pain to install I would remove it and return this product, better than nothing but not by much, sets alarm with concrete road dividers, trees, bushes, alot of times misses cars coming up from behind, dont waste your time and money

Sensible install instructions. Not difficult but is time consuming installation on my Ford Edge. Like that the sensors are hidden inside the rear bumber cover and mounted to the vehicle. Couple of wires related to reverse wire connection (cross traffic perhaps) and door wire connection (vehicle or object approaching-opening door warning perhaps) were confusing but hooked them up anyway. Works very well. Good value for money.

Didnt work for me