Specification:
Main material: gravel, paper, strong acrilyc glue, fluorescent
Temperature range: 14-140 ℉ / -10-60

Properties:
Glow in the dark for up to 8 hours.
Aggressive surface with 80 grit for high traction.
Strong water resistant adhesive.
Chemical and oil resistant.
No residue after removal.

Suitable for indoors and outdoors
Suitable for: flat, clean, smooth, hard floors or surfaces (e.g. floors, stairs, steps, corridors, ramps, vehicle steps, emergency exit ladders, scaffolding, cinema aisles, etc.)
Not suitable for: rough, soft, damp, dusty or porous soil

How to use
1. Make sure the contact surfaces are flat, clean, and dry when you apply the tape.
2. Cut the tape to the desired length and round off the corners with scissors.
3. Peel off the protective paper and place the tape in the desired position. (If the temperature is low, please warm it up slowly with a hair dryer and stick with good results)
4. The pressure is applied evenly from the center of the tape to both ends. (Wait for 24 hours)
5. Expose the tape to a light source for a while to keep it glowing in the dark.

Other Tips
The tape absorbs 30 minutes light source can be light for some time. (The more light is absorbed, the easier and longer lasting, then slowly weakened)
If the light stripe fades, don't worry, it will be quite bright soon after "charging" with light.

Manufacturer	Hyber&Cara
Brand	Hyber&Cara
Model number	MapD-998
Product Dimensions	5 x 5 x 5 cm; 400 g
Color	Fluorescent Green
Material Type	Aluminum
Number of Items	1
Size	10m
Manufacturer Part Number	Hyber&Cara
Item Weight	400 g

Hyber&Cara Anti Slip Grip Tape Glowing in Dark, Non Slip Adhesive Stair Treads, High Traction Safety Tape for Stairs Steps Decking Indoor & Outdoor, Extra Long 10m x 50mm Wide

Details

Description

Specifications

Common Questions