📸 Snap, Clip, and Shine! Elevate your mobile photography effortlessly.
The 52mm Magnetic Camera Lens Filter Mount is a lightweight, high-grade aluminum accessory designed for seamless attachment of lens filters to iPhone 13 Pro Max and iPhone 12 Pro Max, ensuring unobstructed shooting and quick filter changes.
D**S
It’s good if you do this…
Works great if you buy your own double sided sticky tape. I used Gorilla Glue 25lb mounting tape. The provided tape will absolutely fall off when you remove this and getting the magnet out of the lens mount is a challenge. I had to use a box razor to get it because you don’t have a lot of room to pry it out once it gets stuck in there.Also, no you can’t use most cases with this device unless you stock the magnet on the car but the light seal is not great.Lastly, this will cover the back microphone and make sound terrible. Trying to use the side mic to record what’s in front of the rear camera is no hood.Best thing to do is buy this, an easy to remove case or bumper, a mounting rig and an external mic.This does work great though and nd filters are the only way to control this exposure on an iPhone when you don’t have control over the lighting. This is the only way I found to get high quality footage at a low frame rate with twice the shutter speed while filming outdoors in daylight. You will also be able to take photographs with a longer shutter to get motion blur when you use ND-filters.I like it. It was cheap and easy to use. I can slap this on and start filming any time with very little effort.
C**G
Goot filter mount. Wish it could fit with standard case
Good quality lens mount, works well with different set of lenses. But glue sticker does not work that well, the magnet is stronger that it. And the mount does not fit with any case, which is a bummer
A**W
Good idea, but some problems
This is a great idea, much better than those ugly clip-ons. That said, I had a few issues that could be fixed in the next generation.First, it weighs a bit much. No reason to use aluminum this thick. The iPhone 13 Pro Max is already right on the edge of being too heavy for popular gimbals like the DJI, and with this and a case, things can start to get wobbly. Just thin it down a bit.Second, the included tape is much too weak for such a strong magnet. Use a smaller magnet or better tape.Third, the unit doesn’t sit absolutely flush with the included tape - it either needs to angle down a mm or 2 where the magnet is, or we need thicker tape.I’m going to buy some thick strong tape to see if that works, and if I can get it to work with the ultra thin case that’s coming, I may end up gluing it.Very useful otherwise - you need an ND filter for bright days with the 13 ProMax, and circular polarizers are good for virtually all shooting conditions, esp on bright days near water or in scenes with glass.
J**N
Great product, lovely photos/videos with a CPL
Great clip on product to make your cellphone photos pop. Definitely recommend for those who love taking photos on a larger DSLR but don’t want to carry all the bulk.Photos are taken with a iPhone 14 Pro with an Amazon Basics Circular Polarizing Filter.
L**S
Great idea but that little sticker doesn’t stick!
What a great idea but short on delivery, can’t seem to find a good lens holder for a phone out there I’ve tried everything and all of them for short! This was a great idea I thought it would actually work but the sticker does not stick to the phone the magnet tears it right off, therefore it’s no good!
D**S
It really works as advertised.
This has exceeded my expectations. First of all I am using this on my IPhone 12 Pro. The camera lens filter mount with the addition of step-up rings enables me to use filter lenses that I could only use on my Nikon P900. I will be adding more filters to my kit.
F**9
Poor quality
the magnet that holds the frame broke, there is no one to give a guarantee, it only served me once, conclusion I lost my money. if you read other comments you will see that it is a frequent problem
G**E
Works well on iPhone 13pro.
The supplied adhesive didn’t stick. I used 3M VHB double sided tape and it worked better. The holder itself stays secure attached to the magnet.
C**N
Es difícil de instalar
The media could not be loaded. La pegatina con la que viene no se quedó pegada, lo intente pegar en dos estuches diferentes pero al ser un poco flexibles se desprendió.Al final use el famoso truco del cola loca y bicarbonato, no se si con el calor del sol o el mismo celular se pueda desprender más adelante.Saludos
S**D
Perfect just perfect
I love that accessory as I finally can attach proper nd filters to my iPhone camera and long exposure photography becomes extremely easy… love it.
Trustpilot
2 weeks ago
3 days ago