ACDelco Gold 45K6525 (19136562) Front Caster/Camber Bushing

Installed on my 95 F-150 2 wd after installing 2” lift kit. Worked perfect. As far as tightening the pinch bolt to keep them in place, I am not sure what the torque is supposed to be but with ANY pinch bolt the torque is as tight as humanly possible. May slip if just torque to say 112 lbs. I used a cheater bar and socket with extension to get a good grab and tightened til it wouldn’t tighten any more.

Great price, easy to install when doing upper ball joints. Find an alignment shop that will adjust these. I had a tire shop tell me to put these in and then they would not do the alignment. I still have not found a shop that will align with these slugs.

I installed the bushings myself. Not too bad of a job. Plan on getting your vehicle professionally aligned afterword. The alignment shop knew what to do with the bushings.

I was not sure what degrees of an angle I was needing so I purchased this camber because it's like having 11 cambers in 1 . Instructions are not all that clear but you'll figure out.

After some troubleshootingShop guy was able to install them on my 91’ f150 2wd 4.9 truck. He did have to grind just a bit on each to make them go in. With that, camber/caster adjustment was able to be made. I needed this after installing a 2 in leveling kit.

DANGEROUS! DO NOT BUY. Installed with new pinch bolt and over torqued and both failed. These bushings fell up and out while DRIVING ON NORMAL ROADS! Not even off-roading.

Easy to install and easy to get the camber set right. They have been working fine for the past few months

Work perfect for my Super Duty