(10 Pieces ) LM358 LM358P Dual Operational Amplifiers Op-Amp DIP8

These dual op amps funtion exactly as expected. Just remember that if you're only going to use 1 out of 2 then properly deal with the unused amp. Usually that's as easy as turning the 2cnd into a unity amp. Provide a voltage from a divider or whatever to Vin +. Jumper Vin- and the output for that amp. Also read the notes on the datasheet on where to place caps.

Came stuck in standard black foam and not antistatic foam. Moreover, they were not shipped in antistatic bag, which would have negated antistatic foam. Giving these five stars because the cost savings by not adding antistatic foam or bag. If any are defective then I will adjust this review accordingly.

A great universal component for instrumentation. This one is for a signal generator project. Should be fun.

Works superbly and exactly as the datasheet describes, but can only output voltages up to VCC - 1.5V. This fact is burried on page 3 of the datasheet (they did a good job hiding it). This means if you power it with 5V, it can only output 0 - 3.5V. That's missing 30% of the possible output range! This can be worked around for most applications, but I am leaving a negative review until this major caveat is put in the product description.

The parts did not arrive in esd foam as shown in the images. Consequently, some pins were bent, but nothing that couldn't be straightened. I will update after use.

I have used 741's but I saw these first, and they work very well. No problem getting a gain of 100, and easy to compensate (roll off high frequencies) so it is not amplifying noise.

A few of these may have been defective, or I might have applied to high of a voltage. Good price

Package of IC chips. Can't complain.