Bleeder Hydraulic Disc Brake Bleed Kit Tool fit Shimano - Inc. 60ml Mineral Oil Fluid

Inexpensive and easy to use.I needed to bleed my Shimano XT M8000 disc brakes and this system worked great!I did not use the fluid supplied, I ordered Finish Line Mineral Oil instead since I have some friends that have had luck with it.Kit was easy to use and should last a very long time. Bleeding was very fast and very easy to use.The supplied funnel seems to fine, but it is smaller than the actual Shimano version. I had the Shimano one on hand, so I used the Shimano funnel for the waste fluid since I was concerned about over flowing the one from the kit.After bleeding, I’m sure the kit funnel would have been fine, but I’ll keep using the Shimano one till it breaks and keep the kit funnel as a backup.If you need a simple and effective bleeding kit, this is perfect!

Had to bleed my brakes. Kit came. Opened it. Read directions. 20 minutes later brakes were working great. After reading a few other comments here are some tips:1. Go easy on the plastic parts. None of mine broke, but I can see how somebody who was not careful could break the threads off the funnel. The funnel method is very good.2. You'll likely spill some fluid near your pads. "Nah... not me. I've bled car brakes and hydraulic clutches. No problem." But... you will. So do yourself a favor and either remove your pads or cover them with saran wrap. You cover them so no fluid can get on them, then poke the smallest necessary hole in it to get it over the fluid nipple. Very easy.3. Be sure to follow the instructions to get the air out. It only takes a couple of extra minutes.4. Watch how the stuff comes out of that box. and good luck getting it all back in as neatly. I wish I'd taken a picture.

Comes with everything you need to get your brakes bled. The included wrench is your typical stamped steel tool, which fits reasonably well, and will work fine in a pinch, but if you have a real set of wrenches I would advise you to use them. Aside from that, this kit is pretty decent. The plunger in the syringe is nice and easy to modulate, and the fill cup fits perfectly. Do be careful threading the cup in though, as I imagine it would be quite easy to strip.

The kit came with everything needed to bleed my Shimano XT brakes. The instructions are worthless because they only provide a list of parts and they appear to have been Google translated from Chinese. Chinese instructions are included, just in case you prefer Mandarin, lol. I would have given the kit 4 stars because of the instructions and the similarly worthless website, however, since I had quite a few laughs because of the translation I gave the kit 5 stars.Go to GMBH video on YouTube "How to Bleed Shimano Disk Brakes", and you will have the step by step instructions you need.It only took me 15 minutes to bleed my rear brake this being my first time.There's enough mineral oil for both brakes, possibly even 3 bleeds.Anyone can do this and save quite bit of $$$, vs taking your bike to the local bike shop.

Those kit comes with everything you need to do the job and all of the components feel like genuine quality and are easy to use. The online videos are also really great!

I don’t want to give this kit a 1 star review but I’ll say that it didn’t fit my brakes and the directions are very difficult to understand. I would recommend spending the extra money and getting something less disposable.

This works as advertised and will save you alot of money. Doing the actual brake bleeding isn't as hard as it seems. I was confronted with this decision after contacting the store where I bought my bike. The tech was abrupt and after listening him tel me that it will take teo weeks to get my bike back (we're swamped, was his excuse) I decided to do my own, and am glad I did too. I got the kit in, read the directions. My brakes were slightly different, but not a problem. I did a quick bleed after my brakes softened up from sitting all winter. I didnt remove the pads or anything like that. just a flush of fluid and fill...then good to go. Not hard or intimidating. Try it you wont be sorry having this new knowledge.

The only reason I almost didn't chose this kit was the yellow cup. Translucent cups are easier to view the fluid level and make sure to not run out / or over flow during bleeding. The kit i received actually has a clear/ translucent cup so I was thrilled.I used this to gravity bleed the rear brake on my 2018 trek roscoe 8. I think the brakes are shimano 315.Before bleeding The, The rear brake specifically would commonly go to the handle bar without applying the brakes. After pumping it up many many times it would work ok but not like new.After doing a simple, not too messy GRAVITY bleed, the rear brake feels new. I was surprised to see how cloudy and discolored the old fluid was after about 4 years. It was grey not pink.I only used the cup, long section of hose to drain the caliper and of course the fluid. I let it flush a long time and used 75% of the mineral oil.Highly recommend

Was super easy. Did a brake lever bleed. Check youtube vids to make sure.

Good ratio price - quality

it's pretty good for what it costs. i did have one issueThe syringe was wet and dirty inside as if it was used for some time. it doesn't look new...all other parts are pretty good. all delicate plastic so be gentle but it worked and got the job done. take care of it and you dont need anything else.

Tube couldn't thread into syringe because syringe hadn't been properly tapped and threaded in production. Instruction manual is horribly translated from Chinese. Waste of time and money. Don't support horrible products like this

The product works ok but the hose needs to be a smaller size so that it fits tight on the bleeder screws. Once I changed the hose out there was no more air getting into the system. The seal on the cup was very flimsy.(been bleeding automotive brakes for 30+years)If I had to do it again I would take my bike in and just have it done.