🔧 Elevate Your Craftsmanship with Every Cut!
The MEIGGTOOL Router Bit Set includes three precision-engineered bits designed for creating rail and stile entry door frames. With a 1/2-inch shank and cutting depth, these bits are made from high-grade YG6X alloy and feature premium C3 micro-grain carbide cutters, ensuring durability and versatility across various woodworking projects.
R**S
They work as good as the expensive ones
I’ve built cabinets for the laundry room saved a fortune doing it myself with recovered popular wood I got for free they took a little time to figure out the combination but once I did it was great
K**R
Adjustments were made, but I fixed it
It was cheap and I made a door 🤙
C**X
Good value for the money. You'll probably need to adjust yours.
I run a small cabinet shop - mostly hobby but some commercial. I needed to make a 1 1/2" thick set of swinging bar doors for a customer. This router set did the trick. I don't need to make thousands of these doors so super high quality wasn't that important. But I did make the set of doors out of oak and the set remained sharp.The rail end pieces set depth with a bearing so I machined all those first. Then the stile grooves have to be adjusted for depth with the fence on the router table. I set up to take 1/2" at a time - leaving a little bit for a third pass. Once I got done, the rails and stiles would not mate up. On the stiles bit, there are washer shims between the upper and lower. 3 are 0.020" and 5 are 0.010". I used a 20 and a 10 on each side which gave a perfect fit.These are hefty bits so turn the router speed down - I was at 2 out of 5 and slow your feed rate. I would recommend making multiple passes.Overall, I would recommend these bits!
C**Y
Good deal
They work well for the money
S**C
Was able to match competitors
I ordered this for a special run of doors. I needed to match some existing pre fab doors and I didn’t want to spend much on a bit I will rarely use. The set was sharp and did a very good job on solid poplar. I probably would give 5 stars except for a little fuzzing and very slight chipping. That possibly could have been remedied by speed adjustments on the router.
L**B
It worked for one time!
It went dull after first use and started burning through the wood, but no cutting. Save your time and money and buy something worth it.
F**M
1/2 inch router bits
The bits where more than I expected quality wise.
M**S
Junk!
Style and rail does not match, JUNK!
Trustpilot
2 weeks ago
1 day ago