Rev-A-Shelf 4WCTM-2150BBSCDM-2 Double 50 Quart Top Mount Pullout Waste Container

I have to say that I absolutely love this pull out trash can! Installation was a pain because our cabinet was a half inch short of us being able to use one size up so we had to get the 12" wide set up for our 14 1/2" outside opening. A lot of shimming had to be done and with the installation instructions not the best, it took quite a bit of time to install. Having said all that, it was worth it! It is very sturdy/strong, rails are heavy duty and I love the second tray for extra bags. They don't fit perfectly but I took them out of the box and it works fine. This is so much nicer than going under the sink for the trash can, especially with an undermount sink. You will not be sorry - the quality is excellent. The third photo is of the inside of the cabinet after installation.

After researching several different trash can pull-out options, I purchased this one. And I'm so glad I did.We bought the 15" wide, 35 QT. My husband and I installed ourselves and were able to complete it in about 1.5 hours - the instructions were pretty straightforward. Make sure you have all the right tools needed before installing! It will save you a lot of time in the long run. We've had it installed for about 4 months now and it's held up wonderfully. Super sturdy and amazing quality for the price. Just wish it came with the lids. The lids are sold separately and honestly pretty pricey for what it is. It was $40 for two.

As described. Works well. I had a small issue installing in that several of the ball bearings fell out of one of the slides in installation. I managed to find them all & put them back in place. The unit has been working as it should for 3+ months now w/o any issues. I bought this to replace an exactly the same, but non-self closing unit from the manufacture after calling them to see if they wold just sell me the self closing slides to replace the non-self closing slides on my old unit, and they would not.

Can’t go wrong with Rev-a-shelf products! Installed at my daughter’s house and she loves it. Top quality!

We wanted one of these for years in our home. Before this we just had a free-standing garbage can that we pulled out by hand to throw things out. There was a lot of wasted space in the cabinet. Now we fit both our regular garbage and recycling in the same cabinet, accessible with a smooth pull of the handle. The bonus shelf on the side is where we store our replacement bags and leftover grocery store bags fore miscellaneous purposes. Installation was a multi-step process. I had to select a product that the walls that our old cabinet could support (the floor is just cheap fiberboard). Also, it's a trick to get your measurements just right between the back and the front screw points. The slide work well, although because I didn't get it 100% aligned, when I pull out the cabinet for maximum extension, it gets a bit tight. All told we're very happy with the product!(I would also add, we managed to fit this into a cabinet smaller than the size that the Rev-A-Shelf website rates it for. I figured that out by measuring the height of the garbage cans themselves and discovered it would work.)

If you have pets are just want to upgrade your kitchen I highly recommend. Not for an amateur install. I needed way more tools and patience than the average home owner. It took me 1.5-2 hours. And you’ll want a tiny body, and the instructions don’t fully explain how to install. The wood support blocks are a must.(not included ) I recommend hiring a handyman if you aren’t a tool friendly human.

I've been using this for 5 years now, and it works today as it did on the first day. My kitchen cabinet place wanted to charge me over $1000 for a built in (including the cabinet), which I thought was outrageous. I saw this, bought just the cabinet from them, and installed this pull out myself. Magic. I had exactly what I wanted for far less than half the price.There's no lid on the top of the garbage and I spent ages trying to dream up an auto-opening lid to put on top. In the end I didn't even need it. Strangely enough, smells have never been an issue. The cabinet contains everything because the pulley system pulls the door closed tight. The smells don't escape at all.The size is fantastic. Each bucket is quite big. We use the Costco garbage bags, which fit perfectly and are very cost-effective. I bought a box of 400 5 years ago and are still on the same box. I guess we don't produce a lot of garbage (which makes my point about containing the smells even more important!). lol.As someone who has been using this for a little over 5 years, I can say without hesitation this product is awesome.

We were replacing an existing Rev a shelf garbage pull out that had been installed on the base of the cabinet- this one installs on the sides which is a much more difficult install. I liked the feature of the 2nd bin to hold garbage bags so I really wanted this one to work. Installing in a frame less cabinet would definitely be the easiest route, but alas, my cabinets have face frames. Our cabinets are also several inches deeper than this pull out is made for... (side note, you can fudge on the cabinet depth a little, NOT on the width. 12" MEANS 12"!). After trying to figure out what the heck the directions were trying to convey and watching the videos several times, my husband finally decided to just install some 4" wide strips of wood that were the same depth as our face frame overhang (approx 1/2") so the wood strips were flush with the face frame. Then he mounted the rails to the wood strips, making sure they were level of course! So much easier than anything else we'd seen. Use the double sided foam tape (it's very heavy duty!) that's included with the hardware to get the door positioned correctly, then screw it in place.