Lovetao Luggage Suitcase Wheels Replacement Kit 70x24mm/2.76"x0.94" w/ABEC 608zz Inline Outdoor Skate Replacement Wheels, One Set of (2) Wheels (OD:70 W:24 ID:6 Axles:35&40) Black

The original wheels on my case had lost their plastic covering and became very noisy. My travelpro unlike most or all nowadays was not designed to have the wheels replaced as the axles were pressed into place, not screwed. I removed the old wheels with an angle grinder by cutting the outer axle end. The axle then fell inside the case. The new wheels and axle were a good fit but when tightened the wheels would not turn. The bushing pressed into the inside bearing of the original wheel protruded about 8mm which provided clearance from the case body. I allowed for that by using a stack of three washers from the wheel kit on each side to obtain the correct clearance. The shorter axle then fitted perfectly. I tightened the screws and my case is fully functional again. The kit is excellent and the wheels seem to be rugged and strong. They run smoothly and quietly.

Bought these to replace the frail incumbents on a Guest garment bag. The garment bag can be very heavy when full but these wheels have proper bearings and run smoothly with any weight. They are easy to fit, thanks to the choice of axles and the provided pair of Allen keys. On the Guest suitcase they were a very tight fit within the bearer, and this has made for a very robust repair. The rubber has just enough softness to work on polished floors and hard enough to also cope with concrete.Excellent bit of kit and well worth repair rather than replace.

Easy to fit and very sturdy. Roll very smoothly and helped repair two suitcases which otherwise would have been replaced at considerable expense

Came with to sets of nuts and bolts depending on the length required. Shorter one was fine for my bag. Easy to install because of the way my bag was made.

Good kit, easy to fit. The new bolts come with a little bit of “thread lock’ on their threads but I added more to be sure they dont undo in the middle of the airport.Just hacksaw of the old wheel spindle then use either the long or short new bolts together with the new wheel and thats it - 5 minutes work.The wheels include a proper centre bearing so are better quality than the original wheels.

Excellent service they fit ,just like new save 150 pounds by not having to buy a new caseIn every way spot on.

I needed 3 wheels to refurbish a steady for my wood lathe. I struggled to find suitable rollerblade wheels but these are excellent and good value for money. They come with Allen keys, two lengths of axle, plenty of washers and even have a small amount of loctite on the thread. Very happy.

Easy to fix, every item needed for the repair supplied, even the screws have locktight applied, our luggage case now operating normally. Delighted.