AM Radio Electronic DIY Kit, 3V 6 Tube S66E Radio Classic Circuit 535-1620khz Electronic Components with 5mm Headphone Jack for Soldering Learning Teaching

Great fun.

Missing Parts - The RED IF Transformer Is Missing In 99% Of Thsee Radio its Kits The radio will NEVER work without this important part.. Conclusion: This kit is NOT recommended

Yes it's a basic superheterodyne am radio. The resistors are poorly marked (even if you know the coding schema). You have to measure ea one individually. They did have everything included in the kit. Instructions are in Chinese, but there is a schematic included. After putting it all together, I bridged the test points, because I figured there wouldn't be much I could do about errant current readings/testing. You will have to fiddle with the transformers to get it to receive stations, but it does work, after a fashion. Another thing is that the solder pins on the headphone jack are so short that they can't really be soldered to the board. If yours has those short pins it won't give you any sound with speaker or phones, leave the jack out, and jump the appropriate connection to get sound out of the speaker. It is avery modest dose of nostalgia. There're no good stations on am anymore anyway.

Made sure all components went where they were supose to go. The led comes on and no sound comes out speaker or head phone Jack Very disappointed

Pretty radio. However, the 2 IF transformers.were bad. No continuity on the primary coils when checked with an ohmmeter. Good for parts though.