FEL-PRO VS 50607 R Engine Valve Cover Gasket Set for Honda Pilot

I was very pleased. Everything fit and sealed well. Look very durable. Highly recommended

Good replacement for the valve cover, if you have a leak definitely replace them

So it was a challenge on my 04 TL, but it got done. 1st times are always the hardest. Wish I had a 8ft/96in - lb torque wrench but I did my best guess and so far, no leaks!I cleaned up the engine area really good so I can more easily spot anything new. Saved me $200 and I enjoyed doing it. Took about 6 hours for me. Hardest part was removing spark plug seals.The blue color of this high quality Felpro gasket is great too! Easy to check work before committing.Next project is replacing the vtec oil gasket and o-rings at the oil filter assembly. Going to reuse the original mesh screen in new rubber.

Price was very affordable and included all valve cover gasket. Spark plug tube gasket its a little difficult to remove as you have to be very careful not to scratch the aluminum. Used a 27mm craftman socket or a 24mm impact socket to drive the spark plug seal gasket in place with a mallet. The small gasket from the bolts was removed with a box cutter knife and a small screwdriver, the inserted the new one with the back of the 24 or 27mm 1/2" socket and a mallet with a little WD40 on a vise.

Works great

FEL-PRO makes nice gasket sets. Less than half the price than the local auto store and a trusted brand rather than their store brand garbage.

The gaskets only fit the front valve cover. It back valve cover does not fit. Very bad product-vehicle matching. Wasting a lot of time to find out that one of the gaskets does not fit my vehicle.

Fits my 2003 to 2007 honda accord v6 great.

The parts arrived on time and was exactly as per the pictures and description. Fit perfectly in my 06 Odyssey. It’s been a month now and I see no issues.

As other reviewers have said, FelPro has changed this product, it no longer includes the two tabs on each gasket which align with the notches in the valve cover. I had no choice but to use it anyway because in Australia gaskets for Honda v6 are very unfairly priced and this was the best option, so once it arrived I had to use it. I used RTV to seal the gap where the notches were, and also put a thin layer of RTV around the whole mating surface to try and make sure it doesn't leak. Besides the missing notches the gaskets are thick and seem durable, and the set comes with everything you need for your valve covers.

Nothing more to say. A good replacement for the money

Good 👍

Perfect fit on my 2007 Honda Odyssey.