6pcs Small Aluminum Heatsink 25x25x10mm / 0.98x0.98x0.39inch Heat Sink Cooler Radiator with Thermal Conductive Double Sided Tape Cooling for ASUS ROG Ally GPU IC Chips (25mmx25mmx10mm, Black)

I have a 4k DVR with front and rear cameras on my motorcycle. The DVR will overheat and stop recording after a while, so not to damage the unit. I bought this and put them on the DVR and no more overheating. The adhesive is strong, (I have a Harley that vibrates as a Harley should) and all the pieces I add to the DVR are still intact. Good product, I strongly recommend!

Slapped two of these things on a 2TB Samsung T7 that I'm using this external storage on a PS5. The T7 is notorious for running really hot, much hotter than its predecessors. I picked these up thinking they would help avoid throttling. And they do. They spread heat easily and definitely helped to improve sustained performance. I see it in download and transfer speeds 3/4 of the way through. The T7 used to throttle like crazy near the end of a long download. It just doesn't now. Worth considering. Just be careful where you stick these things. Getting them off is a pain (use dental floss).

These are good quality heatsinks. Be aware that the supplied mounting tape works but doesn't conduct heat very well. You can greatly improve the heat sink effectiveness by skipping the tape and using thermal paste instead.

Used on a fanless mini PC. Works well to keep the mini-PC cool. The adhesive appears to work well.

As advertised. Would buy again.

Saw a few ROG Ally videos and came across this mod for the SSD. This heatsink does work and it did improve the FPS; however, if you are using this heatsink for the SSD, you will need to file down a corner near the GPU heat pipe to avoid damages to it during reassembly.

Easy fix for the chronic overheating problems I was having with the Garmin Mini dash camera. Unit was catching a lot of sunlight, getting boiling hot and shutting down. Heat sink was a perfect fit to stick on the back of the camera. Adhesive is strong and seems to conduct a good amount of heat because the fins get quite warm and the camera hasn’t been shutting down. Very pleased with this product.

Stick on quite well and seem to have reduced the VRAM Temps on my RTX 3090s (covering the metal backplate of the MSI and Zotac models) by about 4-5*C, GPU temps down 1-2*. A bit on the pricy side when comparing to alibaba or banggood or whatever but 2 day deliver is nice. This should extend the life of a 3090 nicely and is absolutely worth the time and money to do.

Good product seems to work ok for my application

Bought this to cool VRAM on a 3090. Sticks to a side mounted GPU with no issues and ordered more. One package was only enough put heat sinks over half the VRAM but it's already reduced my VRAM temperature 2-4 degrees (but can't be clear if it's just cooling the temperature reading point or if temperatures will reduce further after applying heat sinks over all the ram). May update my review after adding additional heat sinks for 2-4 degrees is worth it to me. Would still like to see 12 heat sinks instead of 6 for the price.

Good quality sticky pads makes fixing of them secure.

I use these little heat sinks on my RTX 3090, a card which has high memory temps. I changed the stock thermal pads and thermal paste on my card which dropped my temps by about 10 degrees C. With these heat sinks I managed to drop my card temps by another 2 degrees C. With a small cheap fan i can usually manage to drop my temps by another degree C or so. These heatsinks slow down the process at which my card heats up but not dramatically as they do get saturated rather quickly, especially with this card. When ambient temps are lower they work more efficiently as dissipating the heat with the help of a small fan. I had bought one pack and then 2 more and in retrospect buying copper heatsinks would have been better but I'm not disappointed by these heat sinks at all. Just remember to be realistic when its come to what your expecting in terms of efficiency. For the price I doubt that I could really get better.

Generally good quality and good value for money, although the adhesive on one of the heatsinks failed and came unstuck repeatedly. The rest have been excellent.